Auralex GeoFusor-22 Installation & User Manual

GeoFusor Sound Diffusors
™
Installation & User Guide
Thank you for purchasing an Auralex
These are highly effective acoustic diffusion devices that can be easily wall or
ceiling mounted and the GeoFusor-22 & GeoFusor-22 FR are also sized to fit
2'x2' drop ceiling grids.
All GeoFusor Models are supplied with the Auralex EZ-Stick Pro
sensitive peel & stick tabs.
NOTE: Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and
painted surfaces when removed. Auralex Tubetak Pro can also be used. See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the panel will be mounted
using small pencil marks, pieces of masking tape or any similar non marring
method. Be sure the wall surface where the EZ-Stick Pro Tabs
is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to
spot clean the wall where the tabs will adhere is recommended. Avoid the use of
household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side
of the perimeter flange at the desired locations, usually near the corners. Apply very firm
pressure for a minimum of 15 seconds.
GeoFusor Sound Diffusors
™
Installation & User Guide
Thank you for purchasing an Auralex
These are highly effective acoustic diffusion devices that can be easily wall or
ceiling mounted and the GeoFusor-22 & GeoFusor-22 FR are also sized to fit
2'x2' drop ceiling grids.
All GeoFusor Models are supplied with the Auralex EZ-Stick Pro
sensitive peel & stick tabs.
NOTE: Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and
painted surfaces when removed. Auralex Tubetak Pro can also be used. See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the panel will be mounted
using small pencil marks, pieces of masking tape or any similar non marring
method. Be sure the wall surface where the EZ-Stick Pro Tabs
is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to
spot clean the wall where the tabs will adhere is recommended. Avoid the use of
household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side
of the perimeter flange at the desired locations, usually near the corners. Apply very firm
pressure for a minimum of 15 seconds.
GeoFusor
® ™
GeoFusor
® ™
pressure
™
will adhere
™
Auralex Acoustics, Inc.
®
1-800-959-3343 | 317-842-2600
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
1379-116.GeoFusor User Guide (01/13/2020 - 11:24 AM)
pressure
™
will adhere
™
Auralex Acoustics, Inc.
®
1-800-959-3343 | 317-842-2600
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
1379-116.GeoFusor User Guide (01/13/2020 - 11:24 AM)
EZ-Stick Pro Tabs:
Apply very firm
pressure for a minimum of 15 seconds.
| Auralex.com
EZ-Stick Pro Tabs:
Apply very firm
pressure for a minimum of 15 seconds.
| Auralex.com