Advertisement
2
1.
Power Control Dial
2.
Thermostat Control
3.
Power Indicator
Light
WARNING:
!
043-6080-0 Garrison_Elec Basebrd Htr_EN_5.15.2013.indd 5
043-6080-0 Garrison_Elec Basebrd Htr_EN_5.15.2013.indd 5
Process CyanProcess Magenta
Process Cyan
Process MagentaProcess Yellow
Process YellowProcess Black
POWER CONTROL DIAL
This heater has two heat settings: High and Low. Use the
higher setting (1500 W) to raise the room temperature
3
quickly. When the desired temperature is reached use
the Low setting. It is usually suffi cient to maintain a
comfortable temperature.
SETTING THERMOSTAT
After heater has been turned on and the room has
reached the desired temperature, slowly rotate the
1
1
thermostat knob counter-clockwise until the heater
shuts off (you should hear a faint "click"). By leaving the
thermostat at this setting it will automatically maintain
this temperature. To lower temperature, rotate the knob
further counter-clockwise (towards the LOW position).
To raise the temperature, rotate the thermostat knob
clockwise (towards the HIGH position).
POWER INDICATOR LIGHT
This heater is equipped with a Power Indicator Light.
The light will illuminate when the unit is plugged in.
TURNING OFF
Turn the Power Control Dial to the OFF position before
unplugging or plugging in the heater. Heater should be
unplugged when not in use.
HOT SURFACES Do not touch body of heater when in use.
Process BlackPANTONE 287 C
PANTONE 287 C
5
5/16/2013 6:31:25 PM
5/16/2013 6:31:25 PM
Advertisement
