1. WELCOME Thanks for purchasing our Gevi products. Gevi has focused on creati- 1. WELCOME........... .
Page 3
ensure that they do not play with the appliance. —13. Turn the appliance OFF, then unplug from the outlet when not When using electrical appliances, basic safety precautions should in use, before assembling or disassembling parts and before cleaning. always be followed, including the following: To unplug, grasp the plug and pull from the outlet.
4. CORD & PLUG INSTRUCTION 5. COFFEE GUIDE OVERVIEW Gevi electric burr grinder has the grind size ring setting ❽ with 35 4.1 SPECIAL NOTES ON PLUG different position for 4 main kinds of coffee, that are suitable for a This appliance has a polarized plug (one blade is wider than the other).
(1) Assemble the bean hopper ❻ by match the white arrow “ ” with the white lock “ —3. Light-off mode: ” mark in the ring. Rotate the bean hopper ❻ clockwise to lock it and the grind size ring setting ❾...
(5) Setting your preferred size by rotate the (12) Long press the Start/Stop icon ❸ for 2s to enter into the child grind size ring setting ❾ from 15 to 35 that lock mode quickly.(If there is no operation after 5 minutes, the ap- is the range between Pour/Drip Coffee and pliance will pass to child lock mode.) French Press.
Page 7
(3) The appliance switch on. (The Cup sele- (8) Press the Time selection icon ❹ to set ction icon ❷ , Time selection icon ❹ , and the second of the grinding function as you Start/Stop icon ❸ will be light.) After 2 want.
(2) Place powder chamber ❿ under the 7. CLEANING AND MAINTENANCE powder outlet. Assemble the bean hopper 7.1 DAILY TIPS FOR CLEANING AND MAINTENANCE ❻ . —1. Unplug the coffee grinder before cleaning. —2. To avoid damage, never wash or immerse the main body of coffee grinder, conic burr ❽...
(14) Assemble the conic burr ❽ and silicone ring in the grinder. (Make sure white dot match (7) Unplug the coffee grinder. with a white line in the Grinder.) (15) Assemble the bean hopper ❻ by match (8) Disassemble the bean hopper ❻ . Take the white arrow with the white lock mark in the brush ⓮...
cover ⓫ to keep the flavour. Problem Picture Cause Solution —5. Tips about the residual powder that is inside the Grinder: 1) If you don’ t change any setting about size of grinding and time, Stop the operation and a good suggestion is, before grinding a new powder, grinding a few Can't grind beans.
Need help?
Do you have a question about the GECGI406B-U7 and is the answer not in the manual?
Questions and answers