Auralex Acoustics GeoFusor-22 Installation & User Manual

Geofusor /
™
Installation & User Guide
Thank you for purchasing Auralex
These are highly effective acoustic diffusion devices that can be
easily wall or ceiling mounted and the GeoFusor-22, 22FR &
T'Fusor are also sized to fit 2'x2' drop ceiling grids. All models are
supplied with the Auralex EZ-Stick Pro
stick tabs.
NOTE: Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will
damage drywall and painted surfaces when removed. Proper use of EZ-Stick Pro Tabs tabs require a
clean wall surface and firm pressure on each tab for at least 15 seconds to assure a long lasting bond.
Auralex Tubetak Pro can also be used. See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the diffusor
will be mounted using small pencil marks, pieces of masking tape
or any similar non marring method. Be sure the wall surface where
the EZ-Stick Pro Tabs
™
oily contaminants. The use of rubbing alcohol to spot clean the
wall where the tabs will adhere is recommended. Avoid the use of
household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and
affix it to the rear side of the perimeter flange, usually near the
corners using firm pressure.
Geofusor /
™
Installation & User Guide
Thank you for purchasing Auralex
These are highly effective acoustic diffusion devices that can be
easily wall or ceiling mounted and the GeoFusor-22, 22FR &
T'Fusor are also sized to fit 2'x2' drop ceiling grids. All models are
supplied with the Auralex EZ-Stick Pro
stick tabs.
NOTE: Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will
damage drywall and painted surfaces when removed. Proper use of EZ-Stick Pro Tabs tabs require a
clean wall surface and firm pressure on each tab for at least 15 seconds to assure a long lasting bond.
Auralex Tubetak Pro can also be used. See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the diffusor
will be mounted using small pencil marks, pieces of masking tape
or any similar non marring method. Be sure the wall surface where
the EZ-Stick Pro Tabs
™
oily contaminants. The use of rubbing alcohol to spot clean the
wall where the tabs will adhere is recommended. Avoid the use of
household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and
affix it to the rear side of the perimeter flange, usually near the
corners using firm pressure.
T'Fusor
™
Diffusors
®
pressure sensitive peel &
™
will adhere is free of dirt, dust or other
(continued on the other side)
T'Fusor
™
Diffusors
®
pressure sensitive peel &
™
will adhere is free of dirt, dust or other
(continued on the other side)
.
1-800-959-3343
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
.
1-800-959-3343
9955 Westpoint Drive, Suite 101, Indianapolis IN USA 46256
EZ-Stick Pro Tabs:
Apply very firm
pressure for a minimum of 15 seconds.
Auralex Acoustics, Inc.
®
| 317-842-2600 | Auralex.com
1666-518.GeoFusor T'Fusor UG (01/13/2020 - 11:48 AM)
EZ-Stick Pro Tabs: Apply very firm
pressure for a minimum of 15 seconds.
Auralex Acoustics, Inc.
®
| 317-842-2600 | Auralex.com
1666-518.GeoFusor T'Fusor UG (01/13/2020 - 11:48 AM)