Advertisement
Quick Links
Advertisement
Related Manuals for Cablematic HUB-1230i
Summary of Contents for Cablematic HUB-1230i
- Page 1 HUB-1230i USER’S MANUAL 2019 Edition...
- Page 2 The computer programs provided with the hardware are supplied under a license. The software provided should be used only with the NCOM series hardware designed and manufactured by TITAN Electronics Inc. Trademarks TITAN and the logo is a registered trademark of TITAN Electronics Inc. in Taiwan. Microsoft, Windows, Windows XP, Windows Vista, Windows Server, Windows 7, Windows 8, Windows 10 are trademarks of Microsoft Corporation.
-
Page 3: Table Of Contents
Contents INTRODUCTION ........................3 FEATURES ..........................4 SPECIFICATIONS ........................5 DIAGRAM OF HUB-1230i..................... 6 INSTALLATION ........................7... -
Page 4: Introduction
USB hub to the host USB port of the PC and connecting your USB devices to the downstream port of the hub, the host PC immediately gains 12 USB ports. HUB-1230i USB hub is designed for use in industrial applications. It is housed in a DIN rail mountable metal case. -
Page 5: Features
FEATURES • Expands one USB3.0 port into 12 USB3.0 ports • Compliant with the USB3.0 specification • Each port provides 5V 900mA power to downstream device • Supports USB3.0 5Gbps(super-speed) USB2.0 480Mbps (high speed) 12Mbps (full speed) and USB1.1 1.5Mbps (low speed) data rate •... -
Page 6: Specifications
SPECIFICATIONS Function Specification Ports Downstream Twelve Upstream LEDs Power Port Status Twelve Power Mode Self-power mode Output Voltage (per port) +5VDC Output Current(per port) 900mA maximum Operating Temperature 0°C to 45°C Storage Temperature -20°C to 70°C Humidity 0 to 90% RH. noncondensing Safety Approvals CE, FCC Housing... -
Page 7: Diagram Of Hub-1230I
DIAGRAM OF HUB-1230i... -
Page 8: Installation
This 12-port USB3.0 hub is a plug-and-play device. The software drivers are installed automatically. • Connect the power adapter to HUB-1230i. The red power LED will light on when the hub is receiving power. Connect the upstream port cable to an unused USB3.0 port on your computer.