Mars PHANTOM PH10 Quick Start Manual

PHANTOM (PH10 and PH12) COMMERCIAL AND INDUSTRIAL
Please read and save these instructions. Read carefully before attempting to assemble, install, operate, or maintain
the product described. Protect yourself and others by observing all safety information. Failure to comply with these
instructions could result in personal injury and/or property damage. Retain these instructions for future reference.

OVERVIEW

Mars Air Curtains are
designed to cover
door openings,
providing both
temperature control/
environmental
separation and flying
insect control, when
the building's doors
are opened. Typical
Installation heights
are: Phantom 10
Series
(Environmental Separation up to 12' / Flying Insect
Control up to 10'),
(Environmental Separation up to 16' / Flying Insect
Control up to 14'). The units are typically suspended from
the ceiling and hidden inside the false roof. They can also
be wall mounted using special brackets. The units are
ETL Listed, Canada and US, for either an inside or
outside mount. Heated units must be mounted on the
inside or the protected side of the opening. The motors
used in the Phantom 10 and Phantom 12 series are 1/2
HP and 1 HP, respectively.
The Phantom Series come standard with an air intake
screen(s).
WARNING
When servicing the product, motor may be hot enough
to cause pain or injury. Allow motor to cool before
servicing.
Installation, Operation and Maintenance Manual
and Phantom 12 Series
SERIES
and should be aware of general safety precautions.
Improper installation can result in electric shock, possible
injury due to coming in contact with moving parts, as well
as other potential hazards.
To reduce the risk of fire, electric shock, or injury to
persons, observe the following.
A. Always disconnect, lock and tag power source before
installing or servicing product.
B. Installation work or electrical wiring must be done by
qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction.
C. The combustion airflow needed for safe operation of
fuel burning equipment in the area may be affected by
the product's operation. Follow the heating equipment
manufacturer's guideline and safety standards, such as
those published by the National Fire Protection Agency
(NFPA), the American Society of Heating, Refrigeration
and Air Conditioning Engineers (ASHRAE) and local
code authorities.
D. When cutting or drilling into a wall or ceiling, be careful
not to damage electrical wiring and other hidden
utilities.
Document No: ICM-IOM
Date: 08/24/20
GENERAL
INFORMATION
Use this product only in
the manner intended
by the manufacturer. If
you have
questions, contact the
manufacturer.
qualified personnel
should install
product.
personnel should have
a clear understanding
of these instructions
WARNING
SAFETY
any
Only
this
Installing