Smart Throttle - Spektrum PowerSafe AR10400T User Manual

Hide thumbs Also See for PowerSafe AR10400T:
Table of Contents

Advertisement

EN
AR10400T Included Items
DSMX Remote Receiver
1
(SPM4651T)
2 DSMX Remote Receiver (SPM9747)
6" SRXL2 Remote Receiver
1
Extension (SPM9100)
12" SRXL2 Remote Receiver
1
Extension (SPM9102)
24" SRXL2 Remote Receiver
1
Extension (SPM9103)
1
Soft Switch (SPM9150)
Battery IC3 connectors
2
(SPMXCA302)
2
Charge receptacles
Aircraft Telemetry Volt Sensor
1
(SPMA9570A)
NOTICE: Disconnect receiver battery(s) at the end of every flying or testing
session. Failure to do so may cause over-discharge of your receiver packs,
resulting in permanent damage.

Smart Throttle

The AR10400T, AR14400T and AR20400T receivers throttle port includes Smart
Throttle. When equipped with Smart Throttle the normal servo connector delivers
the throttle signal to the ESC, plus the ESC can send telemetry data like voltage
and current back to the receiver. The AR10400T, AR14400T and AR20400T
receivers throttle port will automatically detect when a Smart Throttle compatible
ESC is plugged in and the throttle port will begin to operate in Smart Throttle
mode.
ESCs with Smart Throttle and IC3
battery data from compatible Spektrum Smart batteries.
If a standard ESC or servo is plugged into the throttle port on the AR10400T,
AR14400T and AR20400T receivers, the throttle port will operate normally
(PWM signal) like any conventional RC system. The AR10400T, AR14400T and
AR20400T receiver is compatible with the Spektrum Avian line of ESCs for Smart
Throttle.
For Smart Throttle to function you must have a Smart Throttle ESC paired with
a Smart Throttle telemetry receiver, and a Spektrum DSMX transmitter with
telemetry. An update for your transmitter may be required for Smart features.
See www.spektrumrc.com to register and update your transmitter.
AR14400T, AR20400T
DSMX Remote Receivers
1
3 DSMX Remote Receiver (SPM9747)
1 6" SRXL2 Remote Receiver Extension
12" SRXL2 Remote Receiver
1
24" SRXL2 Remote Receiver
1
36" SRXL2 Remote Receiver
1
1
Soft Switch (SPM9150)
Battery IC3 connectors
2
2
Aircraft Telemetry Volt Sensor
1
and IC5
connectors can also pass along
®
®
4
Included Items
(SPM4651T)
(SPM9100)
Extension (SPM9102)
Extension (SPM9103)
Extension (SPM9104)
(SPMXCA302)
Charge receptacles
(SPMA9570A)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powersafe ar14400tPowersafe ar20400t

Table of Contents