Cablematic BV052 Calibration Manual page 5

We leave it as it should be in "P 0.0". Again we press the button or "#" key again and this screen will
appear:
It will be asking us what maximum weight the scale can have. Now we press the "TARE" key and leave the
screen like this photo with the TARE and ZERO keys:
Press the "#" button again to confirm the maximum weight supported and another screen will appear,
which is this:
In this case, it asks us not to put weight on the scale. With the scale without weight and the STABLE LED on,
confirm with the "#" key and jump to the following screen: