Routing The Connecting Cables - Viessmann VITODENS 200-W Installation Instructions Manual

Electrical connections

Routing the connecting cables

!
Please note
If connecting cables touch hot components they will be damaged.
When routing and securing power cables on site, ensure that the maxi-
mum permissible temperatures for these cables are not exceeded.
A Low voltage connections
B 230 V connections
C Internal extension
D Main PCB
E Communications module
Remove the existing cable grommet
when using larger cross-sections (up
to 14 mm). Secure the cable with
cable grommet F (black) integrated
into the casing base.
(cont.)
F Cable grommet for power supply
cable
% Plugs for connecting the cylinder
temperature sensor to the cable
harness
17