Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Jegs 45000
Summary of Contents for Jegs 45000
- Page 1 User Manual for 45000 AC Balance Charger/Discharger 1-800-345-4545...
- Page 2 JEGS. JEGS will not be held responsible for any incidental damages or injury that If you have read this entire manual may result from improper use of this and are still unclear regarding any product.
-
Page 3: Table Of Contents
Table of Contents Caution & Warnings 1 & 2 Features & Specifications Exterior of Unit Main Menu Options User Settings Charging & Storage Charging Lithium Batteries 8-11 Lithium Battery Meter Charging/Discharging/Cycling NiMH & NiCd Batteries 13-16 Charging Lead Acid (Pb) Batteries 17-18 Warning &... -
Page 4: Caution & Warnings
Caution & Warnings Before attempting to charge under constant observation or discharge a battery, first so that you may react quickly read the safety warnings should any problems arise. and charging instructions provided with your battery. Always keep a class D chemical Make sure to contact the fire extinguisher b a t t e r y... - Page 5 Caution & Warnings Cont. This charger and the battery to is observed immediately be charged or discharged should terminate the charging be placed upon a heat-resis- process and refer to the operation tant, non-flammable and non- manual. conductive surface away from any flammable materials.
-
Page 6: Features & Specifications
Features & Specifications Features Specifications • High Power 60-Watt, 6-Amp • AC Input Voltage: Charging Circuit • 100V-240V • Integrated XT60 & Balance • Charge Current: Connections • 0.1-6.0A • Multiple Chemistry Charging: • Circuit Power: LiPo, LiHV, LiFe, Li-ion, NiMH, •... -
Page 7: Exterior Of Unit
Exterior of Unit AC Input (100-240V) Decrease/Increase (To select sub program & to alter values) Cooling Fan LCD Display Battery Type: Start/Enter (To select (To start main program or resume & to stop operations) the operation) Balance Lead Ports: Temperature Sensor Port •... -
Page 8: Main Menu Options
Main Menu Options To navigate to any of the main menu User Settings options press the BATT TYPE/STOP button until the menu is reached. Press Display the START/ENTER button to enter the User settings menu contains program desired menu option. options for advanced user settings. -
Page 9: User Settings
User Settings This charger features preprogrammed Temp Cut-off settings that are well suited for most 120F users. To adjust these, navigate to Display User Settings by pressing BATT This value controls when the charger TYPE/STOP button until the menu is will stop an active process (charge/ reached and then press the ENTER/ storage/discharge/cycle) when an... - Page 10 User Settings Cont. label value on the battery. This will Safety Timer ensure the process does not stop 120min prematurely. The default setting of Display 550mAh is recommended for all 5000mAh to 5200mAh batteries. This value controls the amount of time the charger will allow any active process (charge/storage/discharge/ cycle) to run.
-
Page 11: Charging & Storage Charging Lithium Batteries
Charging & Storage Charging Lithium Batteries To charge a LiPo/LiHV/LiFe/Li-ion At this point no value should be flash- battery, press the BATT TYPE/STOP ing and this information has been button until the screen shows Lithium saved. Unless these settings are later Battery Mode and then press START/ adjusted, the next time the charger is ENTER. - Page 12 Charging & Storage Charging Lithium Batteries Cont. the battery as required to return the Quadrant 1 Quadrant 2 battery to a safe storage voltage, which is roughly nominal voltage of the LiPo Charge battery pack. 5.0A 7.4V(2S) Display Note: Storage mode should be used for all lithium batteries within 24 Quadrant 3 Quadrant 4...
- Page 13 Charging & Storage Charging Lithium Batteries Cont. hours (Ah). Most RC battery manufac- accurate, to start the LiPo/LiHV/ turers label batteries with a mAh value, LiFe/Li-ion charge or storage charge, which is 1000 times the amp hours (Ah) first connect the batteries main lead rate.
- Page 14 Charging & Storage Charging Lithium Batteries Cont. screen will provide an error message. and S: values match before pressing START/ENTER. Your battery is now ready to charge or storage charge. Start the selected When charging or storage charging, mode by pressing and holding the press the DEC (decrease) button START/ENTER button for 3 seconds to scroll through other useful details...
-
Page 15: Lithium Battery Meter
Lithium Battery Meter This charger features a lithium battery to the individual cell voltage screen meter, which will display the individual by pressing the INC (increase) button cell voltage, as well as the overall once more. voltage from the battery pack. To use this feature connect both the balance When finished press the BATT TYPE/ lead and the main lead of the battery... -
Page 16: Charging/Discharging/Cycling Nimh & Nicd Batteries
Charging/Discharging/Cycling NiMH & NiCd Batteries To charge, discharge or cycle To change the first quadrant’s value (charging & discharge) a NiMH or NiCd press the START/ENTER button and battery, press the BATT TYPE/STOP the value will begin to flash. Change button until the screen shows NiMH/ the value by using the INC (increase) NiCd Battery Mode and then press... - Page 17 Charging/Discharging/Cycling NiMH & NiCd Batteries Cont. Quadrant 1 allows the charger to be will first charge using the settings set for NiMH or NiCd batteries. By configured in charge mode, rest for the default the charger is set to NiMH amount of time configured under User mode supporting 7.2V, 8.4V, and 9.6V Settings >...
- Page 18 JEGS recommends setting The charger has a built in XT60 charge this value to no lower than 1.0V per lead port and also includes a XT60 (yel- cell unless otherwise specified by the low) to EC3 (blue) adapter.
- Page 19 Charging/Discharging/Cycling NiMH & NiCd Batteries Cont. Your battery is now ready to charge, the BATT TYPE/STOP button to stop discharge, or cycle. Start the the process at any time. selected mode by pressing and When charging or storage charging, holding the START/ENTER button press the DEC (decrease) or INC for 3 seconds after which a series (increase) button to scroll through the...
-
Page 20: Charging Lead Acid (Pb) Batteries
Charging Lead Acid (Pb) Batteries To charge a lead acid (Pb) battery, button. Pressing the START/ENTER press the BATT TYPE/STOP button button once more will cause the next until the screen shows Lead Acid quadrant value to flash and this can Battery Mode and then press START/ be changed in the same way. - Page 21 The JEGS charger has a and temp cut-off settings values as built-in XT60 charge lead port and also well as internal temperature readings.
-
Page 22: Warning & Error Messages
Voltage in one cell in the pack is too high to safely charge. Please see the BREAK DOWN voltages of each cell and the LiXX program selected Display The charger has an internal error. Please contact JEGS customer service. Continued onto next page. 1-800-345-4545... - Page 23 TEMP OVER ERR Display Internal temperature of the charger is too high. Allow time for the charger to cool CONTROL FAILURE Display The processor cannot control the feeding current. Contact JEGS customer service 1-800-345-4545...
-
Page 24: Warrany & Service
(including opening of the JEGS does not have any liabilfy to any person or entfy sealed battery pack). with respect to any loss or damage caused or alleged...
Need help?
Do you have a question about the 45000 and is the answer not in the manual?
Questions and answers