Subscribe to Our Youtube Channel
Summary of Contents for StudioDesk PCTWBL
- Page 1 PCTWBL PC THRONE TOWER FOLLOW THE LINK FOR STEP BY STEP VIDEO ASSEMBLY MANUAL Please assemble your product on soft surface to avoid scratches and damages on lacquer.
- Page 2 The Desk You Deserve Thank you for making StudioDesk your choice! Before beginning assembly of your stand, lets get familiar with the parts you have received in your package. Please match the corresponding numbers on this page with the drawings. Parts 1. Perforated mask 2. Top and bottom board 3. Central vertical board 4. Front and back board 5. Shelves Bottom NOTE LED Strips are installed. It will work only if connected to VALOR Station LED network. Hardware Tools needed (Not included) Wooden Dowels M6 Screw Plastic cover 7 pcs 12 pcs Hexagon 5 pcs 2 pcs Glides Screw Shelf holder 3x16 wood 4 pcs 8 pcs 4 pcs...
- Page 3 Parts in use Step One Install Dowels to Vertical boards. Install connection inserts as shown in the illustration on the right right. Inserts has to point towards up. Step TWO Connect top board and main vertical board with dowels. Make sure that inserts are positioned on the right side as shown on the illustration. Step Three Fasten top board to the main vertical board using long screws 6 x 50. If screws does not find its thread, make sure that inserts are pointing towards up. ...
- Page 4 Step Four Connect top board with rest of the vertical boards on dowels as shown in the illustration. Parts in use Step Five LED Lights Install headphone holder to the perforated mask using M6 screw. Step Six Fix mask to the vertical board with screws on the both sides. Should you using electric screwdriver, reduce torque to minimum. ...
- Page 5 Step Seven LED Lights installed inside the tower has to be connected to the VALOR Desk LED Network. Take the long cable from the VALOR Desk LED set and connect it so the arrows on the connectors meet each other As shown on the illustration on the right. Step Eight To secure connection firm, use enclosed shrink tube heated with lighter. Step Nine Pull the cable trough the hole on the bottom plate and secure It pushing it to the the carved channel. ...
- Page 6 Step Ten Fix bottom plate with two long Screws. Make sure that inserts point towards up. Parts in use Step Eleven Install glides by fixing it using M6 screws. Parts in use Step Twelve Install metal shelf holders on the both sides. Parts in use...
- Page 7 Step Thirteen Install shelves leaning on the metal holders. ...
Need help?
Do you have a question about the PCTWBL and is the answer not in the manual?
Questions and answers