Download Print this page
ZOKU Quick Pop Maker Instruction Manual
Hide thumbs Also See for Quick Pop Maker:

Advertisement

Quick Links

INSTRUCTION MANUAL
www.zokuhome.com

Advertisement

loading

Summary of Contents for ZOKU Quick Pop Maker

  • Page 1 INSTRUCTION MANUAL www.zokuhome.com...
  • Page 2 – the possibilities are endless! Juices that contain artificial sweeteners (aspar- tame, saccharin, etc.) may be difficult or impos- sible to remove from the Quick Pop Maker and are not recommended. Soft ingredients such as ice cream and pud-...
  • Page 3: Important Safeguards

    • Do not use sharp objects or utensils inside the Quick Pop molds. Please read all instructions before using. • Do not use the Quick Pop Maker over SAVE THESE INSTRUCTIONS FOR FUTURE flames, hot plates or stoves, or expose to a REFERENCE.
  • Page 4 Maker ® Make sure the molds are COMPLETELY DRY and place the Quick Pop Maker in the freezer for 24 hours. Make sure the freezer temperature is set to 0°F. (-18°C) or less. PLACE THE QUICK POP MAKER LEVEL AND UPRIGHT IN YOUR FREEZER.
  • Page 5 Insert Sticks Pour Juice Slowly pour chilled juice into the Remove the Quick Pop Maker from the freezer after approximately 24 molds and stop just before the fill hours. Insert sticks and make sure line as shown. Chilled ingredients will the tabs are lined up with the notch result in faster Quick Pops.
  • Page 6 The Triple Quick Pop Maker can make up to 9 pops, the Duo Quick Pop Maker can make up to 6 pops, and the Single Quick Pop Maker can make up to 3 pops. *Individual results will vary.
  • Page 7 Then, continue with step 4 (on page 5). TIP: For fun angles, try tipping the Quick Pop Maker by placing a book under one side while each layer freezes (fig B). For insane Zoku geometry (fig C) use the Zoku Tool Kit, sold separately.
  • Page 8 (fig A) or use the siphon from the Zoku positioned BEFORE the dry ingredients are Tool Kit, sold separately (fig B). Next, pour in added.
  • Page 9: Cleaning And Storage

    Cleaning and Storage Storing the Quick Pop Maker in the freezer is the best way to keep it ready for action. DO NOT WASH THE QUICK POP MAKER IN THE DISHWASHER. ALWAYS STORE THE Troubleshooting UNIT LEVEL AND UPRIGHT.
  • Page 10 The Super Tool is jammed. Quick Pop Maker. If the Super Tool is hard to turn or jams 2) Make sure the Quick Pop Maker is COM- BEFORE it comes into contact with the mold PLETELY DRY before putting it in the freezer.
  • Page 11 In order to properly freeze the Quick Pop The refrigerant liquid is non-toxic, but do not Maker, your freezer needs to be set to 0°F. try to use the Quick Pop Maker any longer. It (-18°C) or below, which is also the ideal should be discarded immediately.
  • Page 12 CANADIAN PATENTS: 2,749,324, Canadian Industrial Design Ⓓ Registration Number 137761, Propeller, Inc. ADDITIONAL U.S. & FOREIGN PATENTS, TRADEMARKS, COPYRIGHTS, & REGISTRATIONS ISSUED & PENDING. Visit our website for patent information: www.zokuhome.com/pages/patent-information ZOKU, LLC Hoboken, NJ www.zokuhome.com © 2012 by ZOKU, LLC. All Rights Reserved.