Page 1
P8-HDBT-L-EXSET neo:Lite 70m HDMI Extender Set INSTALLATION GUIDE...
Page 2
TECHNICAL SPECIFICATIONS neo:Lite 70m HDMI Extender Set Transmitter Input 1× HDMI 2.0a, 1× IR Receiver P8-HDBT-L-EXSET Transmitter Output 1× HDBaseT Class B (Lite) 1× IR Emitter Receiver Input 1× HDBaseT Class B (Lite) Using HDBaseT™ technology, this HDMI extension solution offers 1×...
TECHNICAL IDENTIFY INFRARED RECEIVER/TRANSMITTER neo:Lite Transmitter IR Receiver IR Emitter HDBaseT Output IR Receiver (RX) INSTALLATION HDMI Input Connect a single CAT5e/6/7 cable between the Receiver and Transmitter using the HDBaseT ports IR Emitter (TX) Connect a HDMI cable between the Transmitter’s HDMI Input and the source device (i.e.
TROUBLESHOOTING Should you encounter installation difficulties or issues with device communication, the following checklist of common issues and causes should help resolve your issues. No or poor picture quality: SAFETY PRECAUTIONS • Connected and powered? Double check all HDMI, Ethernet and power cables are firmly connected into the correct ports and all devices are correctly Please read all instructions before attempting to powered.
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate, however, Pulse-Eight Limited assumes no responsibility for any inaccuracies that may be contained in this document. Pulse-Eight Limited also makes no commitment to update or to keep current the information contained in this document.