Felton Digital FELBRSH Quick Start Manual

Back rest bench shelter

WARNING: READ THE ASSEMBLY INSTRUCTIONS CAREFULY BEFORE ASSEMBLING THE BANK REST BENCH SHELTER.

Make sure to wear protective gloves and foot protection when installing and assembling this product. Unpack the unit and make sure all the components are

included before proceeding. This activity requires two or more people as lifting is involved. Please ensure bolts are only finger tightened during the assembling

process for flexibility in lining up components. Securely tighten the bolts before installing the Back Rest Bench Shelter into the ground.

BACK REST BENCH SHELTER

(CODE No. FELBRSH)

Thank you for purchasing our high quality products. The Back Rest Bench Shelter has been manufactured with certified materials to achieve high reliability and minimum mainte-

nance. It is our commitment to provide cost - effective solutions for outdoor applications.

[PBRS1x2]

ITEM

PBRS1

PBRS2

PBRS3

PBRS4

PBRS5

PBRS6

PBRS7

PBRS8

PBRS9

PBRS10

PBRS11

PBRS12

[PBRS2]

DESCRIPTION

SIDE FRAME

BACK REST-2040 mm.

SEAT PLANK –2040 mm.

ROOF ASSEMBLY

SEAT PLANK SUPPORT

M6 x 25mm. HEX BOLT

M6 LOCK NUT

M12 x 45 mm. HEX. BOLT

M12 x 90 mm. HEX.BOLT

M12 x 110 mm. HEX.BOLT

M12 LOCKNUT

M12 PLAIN WASHER

[PBRS12x4]

[PBRS11x4]

A. Locate the two frames [PBRS1] up with bolt down lugs facing

inwards.

B. Place the seat plank supporting brace [PBRS5] in between the

side frames [PBRS1] and secure it with the hex head bolts

[PBRS9/10], lock nuts [PBRS11] and plain washers [PBRS12] as

shown - finger tighten.

QTY

[PBRS1]

(IT CONTINUES ON THE BACK OF THIS SHEET)

[PBRS 6/8/9]

[PBRS 7/10]

[PBRS 11]

[PBRS5]

[PBRS4]

[PBRS2]

[PBRS3]

[PBRS12x4]

[PBRS10x2]

[PBRS9x1]

Table of Contents

Need help?

Do you have a question about the FELBRSH and is the answer not in the manual?

Questions and answers

Summary of Contents for Felton Digital FELBRSH

Page 1 BACK REST BENCH SHELTER [PBRS2] PBRS11 M12 LOCKNUT (CODE No. FELBRSH) [PBRS3] PBRS12 M12 PLAIN WASHER Thank you for purchasing our high quality products. The Back Rest Bench Shelter has been manufactured with certified materials to achieve high reliability and minimum mainte- nance.
Page 2 [PBRS7x4] [PBRS3] [PBRS5] [PBRS6x4] . Place the seating plank [PBRS3] on to the fixing plates of the supporting brace [PBRS5] and secure them, by using hex. head bolts [PBRS6] and lock nuts [PBRS7] - Finger tighten. [PBRS6x4] [PBRS7x2] Back rest Hex bolt Lock nut ASSEMBLED BACK REST...
Page 3 [PBRS8x2] [PSD11x2] [PSD11x2] [PSD10x2] A. Place the shelter roof [PBRS4] on top the main frames [PBRS1] and secure them with hexagonal bolts [PBRS8], lock nuts [PSD11] and plain washers [PSD12] on both ends, as shown - finger tighten. B. Adjust and tight the whole structure with spanners and appropriate tools.