Page 1
VESA Load 15” - 27” 2.8-5kgs/6-11lbs 75x75, 100x100 Tilt Rotate Swivel -90°/+85° 180° 360° DM553 Max weight 11 lbs-5kg CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
Page 2
DISCLAIMER - WARNING INFORMATION WARNING:FAILURE TO READ,THOROUGHLY UNDERSTAND,AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY,DAMAGE TO PERSONAL PROPERTY,OR VOIDING OF FACTORY WARRANTY! It is the responsibility of the installer to ensure all components are properly assembled and installed using the instructions provided.If you do not understand these instructions or have any questions or concerns,please contact customer service.Do not attempt to install or assemble this product if the product or hardware is damaged or missing.
Page 3
PRODUCT LINE GRAPH Max.1584mm Insert the screw through +/-45° M6x25 the hole from extension 90° arm to the decorative cap. 90° 360° +/-45° 85° 90° 360° +/-45° 360° 85° Max.792mm 85° Product A Max.1584mm +/-45° 90° +/-45° S=3mm 360° 90° S=5mm 90°...
Page 4
Installing PRODUCT B CONTENTS S=5mm (x3) Remove the screw on middle spring arm (x4) (x1) option M4x12 M4x30 M4x12 (x12) M4x30 (x12) 13X5.5X16.5 S=3mm (x1) S=5mm (x1) 13X5.5X16.5 (x12) (x1) M6x25 (x6) (x6) (x1) (x1)
Page 5
Installing PRODUCT A S=5mm Warning: Please make sure the desktop is strong enough to hold a maximum of 50 kgs. S=3mm NOTE:If space is still not enough for clamp,remove clamp screw and attachment entirely and reattach clamp screw with attachment upside-down.
Page 6
M6x25 Insert the screw through the hole from extension arm to the decorative cap. M6x25 Insert the screw through the hole from supporting part to the decorative cap. option S=3mm M4x12 M4x30 S=5mm S=5mm S=3mm 13X5.5X16.5 S=3mm...
Need help?
Do you have a question about the DM553 and is the answer not in the manual?
Questions and answers