Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for IntelliCam FBA-1
- Page 1 FBA-1 Flashback Adapter DocRef # 0490601 FBA-1 User Guide Revised 2019-10-15...
- Page 2 TABLE OF CONTENTS: Introduction Page 3 Hardware, Controls, and Indicators Page 3 FBA-1 Components and Indicators Page 4 Using Wireless Sensors Page 4 Sensor Range Test Mode Page 5 Sensor Walk Test Mode Page 6 Sensor Programming Page 6 Contact Information...
- Page 3 Video Recorder, plus is a “trigger activation” that grounds the third trigger line to control and start the video recording process. When the FBA-1 receives a sensor alarm, it will ground the trigger line to initiate or start the video recording.
- Page 4 Seismic, Magnetic, Motion, or Light. Each of these sensors has its own unique Sensor ID. SENSOR ID’s: The FBA-1 Flashback Adapter has been designed to accept only two different Sensor ID’s. You must program the desired sensors for either ID 1 or ID 2. No other Sensor ID is compatible with the FBA-1 Flashback Adapter.
- Page 5 Module. The WTM-3A is an optional device and must be purchased separately, but has the advantage of mobility and small size. The other option is to use any Intellicam receiver, the unit can either be carried while range testing or can be placed near the target...
- Page 6 Sensor will detect a target. IMPORTANT: When using the IR-903 Sensor with the FBA-1 Flashback Adapter, it is mandatory that you program the sensor for either ID 1 or ID 2 as those are the only ID’s that are compatible for use with the FBA-1 Flashback Adapter.
- Page 7 903 will play back the default Sensor ID of 3, or the default Max Sensitivity of 5. Sensor ID Menu: IMPORTANT: The FBA-1 requires the sensor to be programmed to either ID 1 or ID 2. The first menu is the Sensor ID menu. When power is first applied the IR-903 enters the...
Need help?
Do you have a question about the FBA-1 and is the answer not in the manual?
Questions and answers