Advertisement
Quick Links
Advertisement
Summary of Contents for NITEVIZOR OWL-XTR
- Page 1 OWL-XTR USER MANUAL...
- Page 2 OWL-XTR NITEVIZOR OWL-XTR Thank you for choosing the NITEVIZOR OWL-XTR. Please read the user manual carefully before using your new device. Important Safety Information 1. Never look directly at the IR fill light when illuminated. 2. Do not leave the product un-supervised with persons under the age of 16.
- Page 3 OWL-XTR Distance Focus Ring P.OFF Button On / Off Button Photo / Video Button Exit / Rangefinder Button Side Accessory Rail Scroll Wheel Diopter Adjustment Ring...
- Page 4 OWL-XTR Initial Setup Charging the Rifle Scope The rifle scope is equipped with a USB Type C port which is located under the rubber cap on the right side of the rifle scope. Plug the included USB Type C cable into a USB wall charger that has an output of 2 amps.
- Page 5 OWL-XTR ...MicroSD & USB C Ports To remove the MicroSD Card from the port, push the card slightly in using the same thin object that was used to insert it. When the MicroSD card pops up a few millimeters, the card can be removed with finger tips or tweezers.
- Page 6 OWL-XTR ... Controls Exit/Rangefinder The Exit/Rangefinder botton has multiple functions. In the Menu/Settings interface, press the Exit/Rangefinder button briefly to navigate Up/Back through the menu and back to rifle scope mode. In rifle scope mode, press the Exit/Rangefinder button to activate and deacti- vate the Rangefinder and Ballistic Calculator.
- Page 7 OWL-XTR ...Mounting Caution: Before mounting, ensure the firearm is not loaded. Always use safe weapon handling procedures. Note: Please do not overtighten the mounting ring scews as this could damage the rifle scope. We recommend torque settings of 30in-lbs. IR850 Infra-Red Illuminator Note: Please hold the battery tube (not the flashlight head or neck) when tight- ening/loosening the tail-cap.
- Page 8 OWL-XTR ...IR850 Infra-Red Illuminator In order to make the spot area of IR Illuminator coincide with the observation range of the rifle scope, it is assembled into the mounting seat. Place it on the side accessory slide rail of the rifle scope. After securely installing, loosen the two screws at the top of the mounting ring slightly.
- Page 9 Application for Android and iOS The APP for the rifle scope is available for Android and iOS devices. Please check www.nitevizor.com for the latest download links. Once installed, you the following icon will appear on the device: Connecting to the APP Turn on the WIFI setting of your Android or iOS device and select the ‘rifle-...
- Page 10 OWL-XTR Operating the OWL-XTR Rifle Scope Home Screen When the rifle scope is switched on, the Home Screen will be displayed, com- prising the real-time video image, a status bar at the bottom and additional information at the top of the screen.
- Page 11 OWL-XTR ...COR (Crosshair Calibration): Step 5: After adjusting the center of the white crosshair to the ballistic point, press the Exit/Rangefinder button to save the crosshair setting, then rotate the Scroll Wheel and select the preset number to be used. Press the Exit/Range- finder button again to confirm the setting.
- Page 12 OWL-XTR ...Menu/Settings Interface A-REC (Automatic Recording) A-REC mode enables video recording to be started when the trigger of the fire- arm is pulled. Rotate the Scroll Wheel and select A-REC. Press the Scroll Wheel for 3 seconds to enter revision mode, then rotate to select the desired value.
- Page 13 OWL-XTR ...Menu/Settings Interface RESO (Video Resolution) The Video Resolution can be adjusted by using the Scroll Wheel to select the RES option, the rotating to select the desired video resolution. PB (Playback) Rotate the Scroll Wheel to select the PB option, then rotate to select either Video or Photo playback, then press the Scroll Wheel to select.
- Page 14 OWL-XTR Technical Specification • Field of View @1000 yds: 250ft(4.8°) • Sensor: Sony 4K Sensor I 3840 (H) X 2160 (V) • CPU: 14nm Quad-Core Processer • Display Resolution: 1280x720 HD Display • Eye Relief: 60mm • Video Resolution: 4k@30/60fps, 1080p@ 30/60/120/200fps, 720p@200fps •...
- Page 15 +15°C(60°F). Do not store near heating devices. Do not store in direct sunlight or high humidity conditions (higher than 70%). NOTE: The OWL-XTR is a precision electronic device. Do not attempt to service this camera, LCR or IR illuminator yourself, as opening or removing...
- Page 16 OWL-XTR FCC NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 17 OWL-XTR Disposal of Electric and Electronic Equipment (Applicable in the EU and other European countries with separate collection systems) This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household waste. Instead, it should be disposed at the respective col- lection points for recycling provided by the communities.
- Page 18 support@nitevizor.com...