GBlife TS-8210 User Manual
  1. Manuals
  2. Brands
  3. GBlife Manuals
  4. Weather Station
  5. TS-8210
  6. User manual

GBlife TS-8210 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Gblife TS-8210 Wireless Weather Station
User Manual
1. Introduction
Thank you for your purchase of the Gblife TS-8210 Colorful LCD Wireless Professional Weather
Station with Thermo-hygrometer .The following user guide provides step by step instructions for
installation, operation and troubleshooting.
2. Getting Started
Note: In order to enable better and faster matching of indoor and outdoor signals, please turn on
the remote sensor first, then the indoor weather station. If you turn on the base station first, the
outdoor data will not display properly, please long press CHANNEL/+ button to receive the
outdoor signal manually.
NOTE: This weather station can only match and display one outdoor sensor, multi-channel
switching is not supported.
2.1 Remote Sensor Set Up
Note: To avoid permanent damage, please take note of the battery polarity before inserting the
batteries.
Figure 1
Push the battery cover away in the direction of the indicated arrow, as shown in Figure 1. Insert
two fresh AAA batteries (with the negative terminal of the battery in contact with each spring).
Lithium batteries are recommended for cold weather environments. Close the battery cover. The
LED shown in Figure 1. will light up (visible through the plastic).
2.2 Indoor Machine Screen Display
Figure 2.)
2.2.1 Screen Layout(
Note: The following illustration shows the full segment LCD display for description purposes
only and will not appear like this during normal operation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TS-8210 and is the answer not in the manual?

Questions and answers

Related Manuals for GBlife TS-8210

Summary of Contents for GBlife TS-8210

  • Page 1 Gblife TS-8210 Wireless Weather Station User Manual 1. Introduction Thank you for your purchase of the Gblife TS-8210 Colorful LCD Wireless Professional Weather Station with Thermo-hygrometer .The following user guide provides step by step instructions for installation, operation and troubleshooting.
  • Page 2 Figure 2 1. Weather tendency indicator 13. Indoor humidity display 2. Sensor Low power indicator 14. Indoor temperature display 3. Dew point and temperature display 15.week or second 4.Outdoor temperature display 16.Clear for 24h icon nits (°F or °C) 5.Outdoor Temperature u 17.Year or date 6.Channel indicator 18.SNOOZE Flashing Time sleep...

  • Page 3: Remote Sensor Installation

    Figure 3 The screen will instantly display indoor temperature, humidity, pressure, weather tendency, and time. The outdoor temperature and humidity will update on the display within a few minutes. Do not touch any menu buttons until the outside transmitter reports in, otherwise the outdoor sensor search mode will be terminated(While in the search mode, the remote search icon will be constantly displayed).

  • Page 4: Low Battery Icon

    Figure 5 4. Low Battery Icon A low battery indicator icon will be shown on the screen when the remote sensor battery is about to run out. When the icon appears (the battery voltage is lower than 2.4V), replace the batteries in the sensor with fresh batteries.

  • Page 5: Set (Program) Mode

    accept the change and advance to the next display mode. 4. The Forth Touch: Touch(do not hold) the SET key once to view alarm time value. Press the SET(MODE) to accept the change and end the whole setup process. No operation for 15 seconds the machine will return to normal display mode. NOTE: 5.2 Set (Program) Mode While in Normal Mode, Touch and Hold the SET(MODE) key for at least three seconds to enter...

  • Page 6: Max/Min Mode

    5.3 Sensor Search Mode To reacquire the lost signal, touch and hold the CHANNEL/+ button for 3 seconds to enter the sensor search mode. 5.4 Snooze Mode flashes, touch the SNOOZE/LIGHT key to When the alarm goes off and alarm icon temporarily silence the alarm for five minutes.

  • Page 7: Weather Icons

    Note: The weather forecast or pressure tendency is based on the rate of change of barometric pressure. generally, when the pressure increases, the weather improves (sunny to partly cloudy) and when the pressure decreases, the weather degrades (cloudy to rain). The weather forecast is an estimation or generalization of weather changes in the next 24 to 48 hours, and varies from location to location.

  • Page 8: Storm Threshold Indicator

    Storm Pressure is falling and the previous condition is rainy. Cloudy and rainy icon will be flashing 6.3 Storm Threshold Indicator The storm threshold (the negative rate of pressure change signifying a storm is expected) can be adjusted from 3 mbar/hour to level 9 mbar/hour (the default level 4 mbar/hour). The lower the level pressure threshold setting, the higher sensitivity for weather forecast changes.

  • Page 9: Power Consumption

    7.3 Power Consumption • Indoor weather station : 3 x AAA 1.5V Alkaline or Lithium batteries (not included) or a 1.5M USB cable (included) • Remote Sensor : 2 x AAA alkaline batteries or Lithium batteries (not included) • Battery life: Minimum 12 months for base station with excellent reception. Intermittent reception and multiple sensors may reduce the battery life.

Table of Contents