Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21a
Advertisement
Related Manuals for Avanti 57637
Summary of Contents for Avanti 57637
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 3 Have your compressor serviced by a qualified repair person using only identical always wear eye protection. replacement parts. This will ensure that the Wear ANSI-approved safety of the compressor is maintained. safety goggles. Item 57637 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 13. Do not remove the valve cover or adjust internal components. SaVE tHESE inStrUctiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 5 Pounds per square inch of pressure National pipe thread, straight Cubic Feet per Minute flow Volts Cubic Feet per Minute flow ScFM Alternating Current at standard conditions National pipe thread, tapered Amperes Item 57637 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 Assembly Diagram near the end of this manual. components and controls regulator/ airbrush Filter Holder pressure Gauge Outlet power Switch Drain Valve Hose paint pre-Set Handle nozzle with needle limiting Knob trigger needle Quick-connect Fitting Quick-connect coupler Page 6 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 7 (about 30 minutes). c. Turning Air Compressor off and d. Resume operation. on again too quickly. 3. Correct any issues before further use to avoid damage to the compressor. Item 57637 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Do not remove Drain Valve. for maximum paint flow. b. Pull Trigger part-way back for less paint flow. 11. Store the Air Compressor and Airbrush indoors out of children’s reach. 1. air 2. paint Page 8 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 9 6. Make sure all parts are dry and free from residual paint, then reassemble Airbrush: Waste Disposal After cleaning, dispose of waste according to paint and solvent manufacturer’s directions and local hazardous waste standards. Item 57637 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 Wipe off any oil or dirt from the Air Compressor. * To check for air leaks, apply soapy water to joints while the Air Compressor is pressurized. Look for air bubbles. Page 10 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 11 Have tank replaced by a qualified technician. Drain moisture from tank daily to prevent future corrosion. Follow all safety precautions whenever diagnosing or servicing the compressor. Disconnect power supply before service. Item 57637 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable. Specify UPC number when ordering 193175419194. Page 12 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 13 Diagram Item 57637 For technical questions, please call 1-888-866-5797. Page 13...
- Page 14 Air Valve Guide Spring Guide Cup Lid Needle Chucking Nut When ordering replacement parts from this list, the “A” suffix must be included in order to get the correct part. Page 14 For technical questions, please call 1-888-866-5797. Item 57637...
- Page 15 Diagram Item 57637 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 57637 and is the answer not in the manual?
Questions and answers