Do you have a question about the VS2233 and is the answer not in the manual?
Questions and answers
Carol J Conroy
March 15, 2025
won't seal, how to turn on to seal
1 comments:
Mr. Anderson
March 15, 2025
To turn on the MOOKA VS2233 to seal:
1. Fill the bag and align its open end into the vacuum sealing channel. 2. Close and lock the front latch. 3. Press the "Vacuum & Seal" button. 4. Wait for the vacuum noise to stop. 5. Keep waiting until the direction light turns off, indicating the process is complete.
Page 16
ETL WARNING 1. Before plugging cord into wall outlet, or disconnecting, make sure the control is OFF, and unplug from outlet when not in use or before cleaning 2. This appliance is not a toy, when used by or near children close attention is necessary, and store this appliance to a safe place, out of the reach of children.
Need help?
Do you have a question about the VS2233 and is the answer not in the manual?
Questions and answers
won't seal, how to turn on to seal
To turn on the MOOKA VS2233 to seal:
1. Fill the bag and align its open end into the vacuum sealing channel.
2. Close and lock the front latch.
3. Press the "Vacuum & Seal" button.
4. Wait for the vacuum noise to stop.
5. Keep waiting until the direction light turns off, indicating the process is complete.
This answer is automatically generated