Do you have a question about the PRO POWER VK3000P and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Volt PRO POWER VK3000P
Page 1
PRESS VK3000P INDUSTRAIL GASOLINE PRESSURE WASHER OPERATOR’S MANUAL IT IS EXTREMELY IMPORTANT TO READ AND UNDERSTAND THE ENTIRE CONTENTS OF THIS OPERATOR’S MANUAL BEFORE ATTEMPTING TO OPERATE THE PRODUCT. THIS EQUIPMENT IS POTENTIALLY HAZARDOUS AND COULD CAUSE PHYSICAL INJURY OR EVEN DEATH IF IMPROPERLY USED.
Page 2
Indicates a hazard which, if not avoided, could result in minor or moderate injury. Read and Understand Toxic Fumes Wet Conditions Alert Operator’s Manual Wear Eye Protection Explosion Fire Hot Surfaces Proper Lifting Injection Risk Kickback Electric Shock Chemical Burns www.volt-equipment.com...
REVIEW THIS MANUAL THOROUGHLY FOLLOW ALL INSTRUCTIONS PROVIDED WITHIN THIS MANUAL. THIS EQUIPMENT CAN CAUSE SERIOUS INJURY TO PEOPLE AND ANIMALS AND SEVERE DAMAGE TO PROPERTY IF OPERATED NEGLIGENTLY OR INCORRECTLY. PAY PARTICULAR ATTENTION TO ALL SAFETY INSTRUCTIONS, WARNINGS AND NOTICES www.volt-equipment.com...
Page 4
The jet must not when the trigger is pulled due to reactive forces. Failure to hold securely can cause loss of control be directed at persons, animals, electrical devices, and injury. or the machine itself. www.volt-equipment.com...
Page 5
Relieve trapped pressure released from the system prior to water pressure in the pump, hose and trigger disconnecting the hose or changing the nozzle. gun by squeezing the trigger AFTER the engine has completely stopped. www.volt-equipment.com...
Page 6
NEVER try to disconnect any water connections • Empty the fuel tank and restrain the pressure without first turning the unit OFF, turning the inlet washer prior to transporting in a vehicle. water OFF and relieving all trapped pressure! www.volt-equipment.com...
Page 7
Relieve trapped pressure from the system by squeezing Engine and pressure washer parts may be the trigger prior to performing any adjustments or maintenance to the unit. hot even if the unit is not running. www.volt-equipment.com...
Page 8
Stopping the engine Rotate key or ignition switch • counterclockwise to the off position. Rotate the fuel valve to the closed position • for storage, maintenance or transportation. Decrease RPM Increase RPM Disconnect battery for storage or • maintenance. www.volt-equipment.com...
Page 9
4. The obstruction should be removed from the tip of the tool. 5. It is important that the garden hose screen be used and kept clean at all times to prevent damage to the pump and prevent the nozzle from becoming clogged. www.volt-equipment.com...
Page 10
The trigger gun traps high water pressure, even when engine is stopped. Relieve trapped water pressure in the pump, hose and trigger gun by squeezing the trigger AFTER the engine has completely stopped. Notice: All pressure and flow ratings are per PWMA PW101-1998 www.volt-equipment.com...
Page 11
Your pressure washer comes preset with the pressure at its maximum. If you require less pressure, you can adjust the pressure down by adjusting the pressure as shown above. Pressure Adjustment Soap injector Pressure Gage 3/8 Quick Connect Garden Hose inlet with filter Notice: All pressure and flow ratings are per PWMA PW101-1998 www.volt-equipment.com...
Need help?
Do you have a question about the PRO POWER VK3000P and is the answer not in the manual?
Questions and answers