Baja Designs will pay the freight if your product is less than 90 days old, otherwise defective products must be returned to Baja Designs, Inc., freight prepaid. At our option, we will repair or replace items in question and return them at no charge. If the identical product is no longer available, we will replace with a similar product of equal value.
Page 3
**For a color copy of instructions, visit your vehicle specific application on BajaDesigns.com ** Tools Required • 7/16” Socket Wrench • 6mm Allen Wrench • 7/16” Wrench • 5mm Allen Wrench • • Electrical Crimpers 10mm Wrench • Standard Screwdriver Using a 6mm Allen wrench, remove the 4 circled fasteners.
Page 4
14. Finish routing the switches to the dash. Mount in the stock location. Tie all wires away from sharp, hot, and/or rotating components. Re-torque all the fasteners after 100 miles. Your install is now complete! Thank you for choosing Baja Designs.
Page 5
RTL-S Diagram II. Reverse Switch: I. Turn signal V. RTL Leads: VII. Taillight Splice Leads: ¾” Panel mount Black – Ground Red – Running/Amber rocker switch backlight switch Red – Running Yellow – Brake/Amber Yellow – Brake II. Battery Leads: IV.