Commeo Multi Send Konfigtool; Usb Connection; Upgrade From Basic To Premium - Selve Commeo Multi Send Basis Quick Start Manual

commeo Multi Send KonfigTool/USB connection/Upgrade

5. commeo Multi Send KonfigTool

The commeo Multi Send KonfigTool is an app that runs on a PC (Windows or macOS).
All settings in commeo Multi Send can also be easily adjusted in the app. The clear display
and simple keypad entry make programming the commeo Multi Send easy. The commeo
Multi Send is connected to the PC via USB.
Download our configuration tool at www.selve.de/en/commeomultisend

6. USB connection

Via the USB connection you have the possibility to program the commeo Multi Send via the
free of charge SELVE software commeo Multi Send configuration tool. Further information as
well as the software can be found on the SELVE homepage www.selve.de
Note: Further information as well as the software can be found on the SELVE homepage. The
USB connection can not be used to supply the commeo Multi Send with power or to charge
the batteries. Do not connect the commeo Multi Send permanently to the USB as it will not
go into the energy-saving mode and the batteries will be used very quickly. Not all USB cables
are suitable for data transmission and are only USB charging cables. Entire USB charging
cables can not be used for the software and the display in the software will not switch to
online.

7. Upgrade from BASIC to PREMIUM

commeo Multi Send is supplied in the BASIC version. To upgrade, you must first purchase a
16-character key code. The code can only be purchased online via the following link:
www.selve.de/en/commeomultisend
Please refer to the 'Upgrade' section for instructions.
After upgrading, connect the commeo Multi Send to the PC/Mac via USB, start the KonfigTool
and open the 'Update' section. Enter the key code and perform the upgrade.
EN
13