Table of Contents
Advertisement
GX20
2) Preparation
• Connect PC and GSM tester with a GPIB cable.
• Connect PC and MS with a Data cable. (Use a full charged battery or one close.)
• Connect an antenna input/output cable of GSM tester to MS.
3) Default setting for the program.
• Activate the program and set defaults.
All manuals and user guides at all-guides.com
CONFIDENTIAL
Figure 23
2 – 10
1) Select the COM port.
2) Set the GPIB No.
3) Select the test instrument.
4) Set the GPIB address.
5) Set the cable loss. For the
supplied cables
(YA00-0988-03), set:
GSM 0.60
DCS 0.95
PCS 0.96
Advertisement
Table of Contents
