Hear and Learn SoundHouse Wiring Instructions

Hear and Learn SoundHouse speaker wiring instructions.
1. From 955 amp/receiver in SoundHouse to 4 x in-ceiling DRQ speakers
inc AV, PA and voices
Redcat Access w/2
Flexmikes and
Media Connector
#2
Media Connector w/
4 - 3.5mm Stereo Input 4 - 3.5mm Stereo Input
Ports
Dect Wireless Link Dect Wireless Link
Access Link w/
Access Link w/
On Dias
2 Flexmikes
Access Link w/
WMQ Speaker Layout
Speakers mounted in acoustical tile with
Speakers mounted 8-9' aff and 1/3 in from
supplied tile bridge. Speakers equally spaced
each corner of room. No two speakers should
for even sound distribution
be directly across from one another.
Redcat Access w/2
Media Connector
Media Connector w/
Ports
Wiring to 4 - 8 ohm speakers
Access Link
955 with DRQ, WMQ or TCQ Speakers
Access Link w/
On Dias
2 Flexmikes 2 Flexmikes
DRQ Speaker Layout
Redcat Access w/2
Flexmikes and Flexmikes and
Flexmike Microphones
Media Connector
#2
#1
955 Front
Dect Wireless Link
TCQ Speaker No ceiling tile grid?
Other speaker
types available
955 Rear
Created 12-09-16
(DRQ or WMQ)
Access Link
Access Link w/ Access Link w/
2 Flexmikes 2 Flexmikes
Single speaking mounted in center of
suspended ceiling. Do not install
directly above a physical obstacle such
as a hanging light fixture or HVAC duct.
Speakers mounted 8-9' aff and 1/3 in from
each corner of room. No two speakers should
be directly across from one another.
All speaker wiring
2 Cond / 18 Awg
Dect Wireless Link
Access Link
Connect to
110v Pwr
955 with DRQ, WMQ or TCQ Speakers
On Dias On Dias
Media Connector
(for audio inputs
WMQ Speaker Layout
TCQ Speaker Layout
955 Rear
Wiring to 4 - 8 ohm speakers
(DRQ or WMQ)
955 Rear
Access Link
Wiring to single 8 ohm
Flat panel speaker
Media Connector
(for audio inputs
All
2 C
Con
11
Con
11