WYLER Multi TC Quick Reference

Quick Reference
WYLER AG
Im Hoelderli 13
8405 Winterthur
Switzerland
Thank you for choosing WYLER!
Read this quick reference before start working with the Multi TC.
Please note the safety instructions.
Brand and Type
Brand:
Type:
Warning!
The following sign is used in this Quick Reference:
This is intended to indicate special danger.

Safety instructions

The Multi TC complies with the applicable directives and standards, see:
- This Quick Reference
- The type label
- The CE Declaration of Conformity at

Intended Use

-The MultiTC is a system component and interface. It is designed exclusively to connect WYLER products
which are equiped with WyBus dll.
- Attention!: There is no other use allowed!

Not intended use

- Do not use as a hammer!
- Do not throw the device! The housing can cause serious injury.
WARNING

DC-Characteristics

Characteristics
Power Supply +24V
Power Supply +5V
Power Consumption
Input Low Voltage
Input High Voltage

Dimensions:

Please Note: To lock the connectors, the
threaded ring is tightened until it is 'finger-
tight' (approx. 50 Ncm)
Technical changes reserved.
E-Mail: wyler@wylerag.com
Tel. +41 52 233 66 66
Website: www.wylerag.com
Multi TC
065-003-000-001
www.wylerag.com
- Do not use this device near sources of strong electromagnetic energy Radiation (e.g.,
unshielded radio frequency source) because they can interfere with operation.
Value
12 – 30 V
4.5 – 5.5 V
max. 450 mW
0.8V
2.4V

Pinout

Multi TC
Outside Switzerland:
contact our representatives
www.wylerag.com/en/contact/representatives/

Common Characteristics

Characteristics
Interfaces
Connectivity
Temp. (Operation and use)
Pinout Port 0:
Pinout Port 0, 1, 2, 3, 4:
1 2
/
Release 1.0
WARNING
Value
RS232 on Port 0
RS485 on Port 1,2,3,4
Wyler USB-Cable
wylerCONNECT
-40 .. 85° C
947-QR-002-E