EHOB WAFFLE Cushion Quick Start Manual

Set-Up

Step 1: Inflate
Using the WAFFLE® L.A.D. Pump, insert the tip
of the pump into the valve. Refer to the inflation
chart on the side of the pump, and inflate your
cushion using the recommended level of strokes.
Cushion

Indications for Use

Precautions

Step 2: Check
Once the cushion appears about 60% full, check
for proper inflation. If you can easily roll one side
of the product past the first set of holes, but not
to the second, your cushion is ready to use.
• Prevention and management of pressure injuries
• Patient comfort
• Use across the continuum of care
• If used in a chair, position shifts should be made
every 15–30 minutes or per individualized schedule
• Avoid direct contact between skin and product
by using a pillowcase, sheet, or breathable under-pad
• Single patient use
• Weight Limit: 300 lbs.
Step 3: Utilize
Place product on seating surface, valve down
and towards the back of the surface.
Continued on other side •