Honda Civic 2017 Owner's Manual page 88

■
Installing a Lower Anchorage-Compatible Child Restraint
System
A lower anchorage-compatible child restraint system can be installed in either of the
two outer rear seats. A child restraint system is attached to the lower anchorages
with either the rigid or flexible type of connectors.
* *
Marks
Covers *
Lower Anchorages
Rigid Type
* Not available on all models
1. Locate the anchor marks affixed to the base
of the seat cushion.
Models with anchorage covers
Pull out the anchor covers under the marks
to expose the lower anchorages.
2. Place the child restraint system on the
vehicle seat, then attach the child restraint
system to the lower anchorages according
to the instructions that came with the child
restraint system.
u When installing the child restraint
system, make sure that the lower
anchorages are not obstructed by the
seat belt or any other object.
uuChild SafetyuSafety of Infants and Small Children
1Installing a Lower Anchorage-Compatible Child Restraint System
WARNING
3
Never attach two child restraint systems to
the same anchor. In a collision, one anchor
may not be strong enough to hold two
child restraint system attachments and may
break, causing serious injury or death.
Some child restraint systems come with optional
guide-cups, which avoid possible damage to the seat
surface. Follow the manufacturer's instructions when
using the guide-cups, and attach them to the lower
anchorages as shown in the image.
Guide-Cup
Continued
Lower
Anchorages
87