Table of Contents
Advertisement
Quick Links
Black Height Adjustable Deskside Bike
Instruction Manual
SKU: CHAIR-BIKE1B
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/chair-bike1b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Related Manuals for Vivo CHAIR-BIKE1B
Summary of Contents for Vivo CHAIR-BIKE1B
- Page 1 Black Height Adjustable Deskside Bike Instruction Manual SKU: CHAIR-BIKE1B Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/chair-bike1b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. - Page 3 STEP 2 Raise the handle underneath the seat plate on Base (A) to raise the seat post. Mount Seat (B) to Base (A) using M8x20 Screws (S-A) with M8 Washers (S-B). Tighten using 5mm Allen Wrench (T-A). Plastic Handle...
- Page 4 STEP 3 Insert Back Support (C) into the seat post of Base (A), just under Seat (B). Secure using M8x20 Screws (S-A) and M8 Washers (S-B). Tighten using 5mm Allen Wrench (T-A).
-
Page 5: Operation
OPERATION DISPLAY OPERATION The LCD desplay requires two AA batteries (not included). Use the key button to cycle through the LCD display and select a function. LCD Display Key Button Two AA Batteries 1.5V TENSION ADJUSTMENT Use governor wheel located on top of Base (A) to increase or decrease resistance. Governor Handwheel SEAT HEIGHT ADJUSTMENT The seat height can be adjusted by pulling up on the lever located under Seat (B). -
Page 6: Seat Position Adjustment
SEAT POSITION ADJUSTMENT To adjust the seat assembly forward or backward, loosen M8x20 Screws (S-A) under Seat (B) using 5mm Allen Wrench (T-A). Once the seat assembly is in the desired position, retighten M8x20 Screws (S-A) using 5mm Allen Wrench (T-A). - Page 7 STORAGE For storage, use 5mm Allen Wrench (T-A) to press in pins located on the underside of Base (A) and rotate the feet towards the base. Limit Round Pin Rear Feet...
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the CHAIR-BIKE1B and is the answer not in the manual?
Questions and answers