Contec MagBag User Manual

MagBag User's Guide
™
Instructions for opening and sealing MagBag
Step 1: Pry
Step 2: Pull
Step 3: Pinch
to dispense presaturated wipes
™
MagBag Wipe Dispenser
™
The MagBag wipe dispenser is a plastic/foil laminate pouch that uses an
innovative system of magnetic strips for easy opening and closing of the
pouch simply by pinching the top closed with one hand.
Pry-Pull-Pinch: Three steps to dispense wipes from MagBag with
one hand.
1. Pry: Stand the MagBag on a flat surface. With one hand, pry the MagBag
open by sliding fingers between the magnetic seals.
2. Pull: Using the same hand, reach into the MagBag and pull out desired
number of wipes.
3. Pinch: To close and seal the MagBag, use one hand to pinch the magnetic
seals together at the middle of the magnet strip.
Facts:
• MagBag can be refilled with wipes and re-used multiple times.
• MagBag provides outstanding closure to prevent evaporation of the solvent.
• MagBag is compatible with most common solvents and disinfectants.
• Magnetic seals of the MagBag are harmless to electronics and magnetic
media in normal use.
• MagBag shipped with finished product will have a product label and lot
code with every wipe shipment.
• The MagBag should be replaced if any thermally sealed seam shows
failure, the MagBag has developed holes or shows excessive wrinkles, or
the magnetic seals no longer seal uniformly across the width of the bag
opening.
• MagBag has no special disposal requirements. It can be discarded as
common solid waste.
NOTE:
1. Contec, Inc. is not responsible for the function, performance, or suitability for
any purpose, of the MagBag when used in conjunction with any products,
materials, solutions, or other items not specifically manufactured and
provided by Contec, Inc.
2. Contec, Inc. is not responsible for any damage, harm, or direct or incidental
effects by the MagBag to, or on, any products, materials, solutions, or other
items not specifically manufactured and provided by Contec, Inc.
Page 1
ph: +1-864-503-8333
www.contecinc.com