Advertisement
Available languages
Available languages
Table of Contents
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COUD RESULT IN
SERIOUS INJURY OR DEATH
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Install the Lamp. This fixture is rated for 60 watt TYPE A
lamp.
DO NOT EXCEED RECOMMENDED WATTAGE
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
www.hudsonvalleylighting.com/mitzi| #mymitzi
HL295201 WILLA TABLE LAMP
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
STEP 3.
Plug cord into a qualified socket of properly rated
voltage.
STEP 4.
On/Off switch installed on top of the shade.
Advertisement
Table of Contents
Related Manuals for HUDSON VALLEY LIGHTING Mitzi HL295201
Summary of Contents for HUDSON VALLEY LIGHTING Mitzi HL295201
- Page 1 HL295201 WILLA TABLE LAMP ASSEMBLY AND MOUNTING INSTRUCTIONS GENERAL • • WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER • BEFORE DISCARDING THE CARTON DOUBLE CHECK THE MAINTENANCE. PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
- Page 2 HL295201 WILLA TABLE LAMP NOTICE D'ASSEMBLAGE ET DE MONTAGE GENERALITÉ • • AVERTISSEMENT – TOUJOURS DÉBRANCHER LA LAMPE À LA VEUILLEZ LIRE TOUTE LA NOTICE AVANT DE PROCÉDER À PRISE AFIN DE COUPER INTÉGRALEMENT LE CIRCUIT L'INSTALLATION. ÉLÉCTRIQUE AVANT D’INSTALLER, DE NETTOYER OU •...
Need help?
Do you have a question about the Mitzi HL295201 and is the answer not in the manual?
Questions and answers