Table of Contents
Advertisement
Opening the Bonnet
Bonnet Release Handle
Pull
Lever
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the bonnet release handle under the
driver's side lower outside corner of the
dashboard.
The bonnet will pop up slightly.
u
3. Push the bonnet latch lever (located under
the front edge of the bonnet to the centre)
to the side and raise the bonnet. Once you
have raised the bonnet slightly, you can
release the lever.
4. Lift the bonnet up most of the way.
u
The hydraulic supports will lift it up the
rest of the way and hold it up.
When closing, lower it to approximately
30 cm, then press down firmly with your
hands.
uuMaintenance Under the BonnetuOpening the Bonnet
1Opening the Bonnet
NOTICE
Do not open the bonnet when the wiper arms are
raised.
The bonnet will strike the wipers, resulting in possible
damage to the bonnet and/or the wipers.
When closing the bonnet, check that the bonnet is
securely latched.
If the bonnet latch lever moves stiffly, or if you can
open the bonnet without lifting the lever, the latch
mechanism should be cleaned and lubricated.
487
Advertisement
Chapters
Table of Contents
