Page 2
INDEX Scope of manual................................. 3 Application and restrictions ............................3 General description of the equipment and spare parts list ..................3 Operation ..................................5 Maintenance ................................6 Replacement of wear parts ............................6...
Page 3
Abrasives: Various conventional types, e.g. steel grit, aluminium oxide, slag, glass beads 3 General description of the equipment and spare parts list Figure 1 shows the components of the Quantum-K valve.
Page 4
Figure 1: Spare parts list Pos. No.: Part no.: Description Pcs. 22780D QK-QUANTUM VALVE 21314D QK-ADAPTER FLANGE 24299D SCREW M10X25 SOCKED HEAD 22621D QK-OUTLET FLANGE 21322D QK-LOWER FLANGE GASKET 22620D QK-COVER 90395D SCREW M 6 X 30MM 03113D WING NUT M 6 22761D QK-REAR HOUSING 24301D...
Page 5
4 Operation The Quantum-K valve is delivered ready for use. It is installed on the blast pot using the R 1 ¼" connection, as shown in Figure 2. Figure 2:Installation on the pot It can be put into operation only in combination with a blasting unit. Before using the machine, all personal involved with the blast machine operation must read the entire blast machine manual, including the yellow cover and all accessory manuals.
Page 6
5 Maintenance Prior to maintenance, make sure that the air valve of the compressor is closed and the whole sys- tem is depressurized! During operation all blast equipment is exposed to wear. In order to ensure safe operation and high efficiency the blast machines should be maintained regularly.
Need help?
Do you have a question about the QUANTUM-K and is the answer not in the manual?
Questions and answers