Download Print this page

Safety Instructions - 8 seasons design No.1 Instructions Manual

160 cm
Hide thumbs Also See for No.1:

Advertisement

SAFETY INSTRUCTIONS

EN
for 8 seasons design No.1 160 cm E27 / LED
FOR YOUR OWN SAFETY AND TO AVOID THE RISK OF SERIOUS INJURY AS WELL AS ELECTRIC SHOCKS AND CONFLAGRATION PLEASE TAKE
NOTICE OF THE FOLLOWING SAFETY INSTRUCTIONS.
1.
Use the light only in accordance with regulations. We assume no liability for any damages, that occur as a result of non-compliance with the
given instructions or inappropriate treatment of our product.
2.
You may use our outdoor lighting systems for inside and outside lighting whereas the indoor lighting systems are made for inside use only.
3.
The lamp must be connected with an earthed socket especially for outdoor use. Make sure that the socket is certified by VDE 0100. The cur-
rent circuit of the earthed socket shall be secured by a fault-current circuit breaker with a maximum of 30mA. Use only extension cords that
are also suitable for outdoor use.
4.
The lights are not designated for installation to walls or ceilings.
5.
You may not put your light into operation if it has been dropped or if it shows visible signs of damage. A checkup and, if necessary, a repa-
ration may only be carried out by a specialized company for electronics or the manufacturer. Not until this has happened you may use your
light again.
6.
To avoid possible danger a damaged exterior flexible line may only be replaced by a qualified electrician or the manufacturer.
7.
Since our lighting systems are no toys, the lights have to be kept out of the reach of children and other unauthorized people.
8.
Prior to installation, replacement of light bulb (only for the version with the E27 socket) and cleaning the power plug must be removed from the
electric socket and the power supply must be turned off. Fuse switches also need to be turned off or the fuse must get completely unscrewed.
Afterwards the loss of electric potential of the power cable must be examined.
9.
For the articles with the E27 socket, only use energy saving bulb with max. 9W 230V 50Hz, available from the manufacturer or your speciali-
zed retailer. Please pay regard to the permitted maximum. Only use illuminates of the same construction and power. The following information
refers to the LED and Solar-Lighting System: Use only the LED or Solar-System supplied by the manufacturer, available from the manufacturer.
10. Parts of the lighting system and especially the illuminate may increase their temperature significantly, so you have to keep it away from easily
inflammable material or items like curtains.
11. Lights with colour caps are only allowed to be put into operation if the colour caps are undamaged.
12. Do not cover the light with any object or material since that involves the risk of short circuit and fire.
13. Before replacing the illuminate or cleaning, the lighting system needs be able to cool down.
14. Only clean the surface of the light. Moisture must be kept from the voltage-carrying parts of the lighting system. Use a slightly damp cloth to
clean the outside. Do not apply any aggressive cleaning fluids.
15. To avoid the risk of fire, short circuit and injury no parts of the lighting systems are allowed to be dunked into water or other liquids.
16. Keep any packaging e.g. plastic bags away from children since they involve the risk of serious injury or death. Dispose your waste complying
with your local regulations.
17. Render disused lights useless immediately. Afterwards dispose them complying with your local regulations.
18. Store these safety instructions in a safe place and reachable for other or following users of the lighting system.
*This luminaire is not suitable for room lighting. It is a decorative item. The LEDs can not be replaced.
/ Solar
*
–16–
~

Advertisement

loading