Movement SELI160 Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OPERATING INSTRUCTIONS

Table of Contents

Need help?

Do you have a question about the SELI160 and is the answer not in the manual?

Questions and answers

Summary of Contents for Movement SELI160

Page 1 OPERATING INSTRUCTIONS...
Page 2 QR code on the front flap of the base of the bed module to go direct to our website, visit it at www.move-ment.ch/serviceandsupport or call our services desk at +41 44 434 27 88 MOVEment Systems AG Hardturmstrasse 134 CH-8005 Zurich SYMBOLS USED Important safety instructions are marked with this symbol.
Page 3 INTRODUCTION Thank you for choosing a home with MOVEment. MOVEment is an intelligent space concept that allows you to move furniture modules around at the press of a button to create different liv- ing arrangements. These instructions are addressed to users of MOVEment sys- tems.
Page 4 EINLEITUNG SYMBOLIC IMAGE...
Page 5: Table Of Contents
Care instructions Product description Further information on the bed module Further information on the office module Sockets built into the modules Main MOVEment drive switch Control panel General tips and instructions Control panel Control panel, Senior model Control panel, Junior model...
Page 6: Intended Use
INTENDED USE MOVEment may only be used in accordance with the safety and care instructions and for the intended pur- pose. No liability will be assumed for damage resulting from use for any purpose other than the intended pur- pose or from improper use.
Page 7: Care And Safety Instructions
CARE AND SAFETY INSTRUCTIONS MOVEment complies with the recognised codes of practice and relevant safety regulations. The equip- ment must be used appropriately to avoid damage and accidents. Please follow these operating instructions closely! CARE AND SAFETY INSTRUCTIONS Safety of children and vulnerable individuals...
Page 8 Disconnecting or interrupting the electrical protection systems and removing the protec- tive ground (earth) conductor is prohibited. If the MOVEment system’s mains connection is damaged it must be replaced by the manufac- turer, its customer services team or someone with similar qualifications to avoid hazard.
Page 9: Precautions
Do not fix sharp objects to the modules. This can lead to injury or malfunction, especially in the direction of travel. Free-roaming and free-flying pets must not be kept in apartments with MOVEment systems. PRECAUTIONS...
Page 10: General Tips And Instructions
A MOVEment system may only be installed and used indoors. GENERAL TIPS AND INSTRUCTIONS • Objects in and on the modules can shift or tip over when the modules move. Make sure fragile objects and receptacles containing liquids are secured! •...
Page 11 Notify us if the system shows signs of damage or wear. • For service, maintenance and repair the tenant must make sure there is access to the MOVEment system, the wall mount and the service openings. • External power sources, devices and cables must be removed while modules are being cleaned.
Page 12: Care Instructions
Before the castors are cleaned, the system has to be deactivated using the main switch in your apartment to prevent unintended movement during cleaning. CARE INSTRUCTIONS...
Page 13: Product Description
PRODUCT DESCRIPTION Apartments fitted with MOVEment systems are all based on the same concept. The moveable modules and the wall connector are located between the bathroom and the kitchen. The bathroom and kitchen are fixed installations that are not part of the MOVEment system.
Page 14: Further Information On The Bed Module
FURTHER INFORMATION ON THE BED MODULE The bed module has a niche to accommodate the mattress (which is not part of the MOVEment system and must be supplied by the user). The niche has the following dimensions: • Bed module 140: length around 204 cm/breadth around 143 cm •...
Page 15: Further Information On The Office Module
FURTHER INFORMATION ON THE OFFICE MODULE The office module (only included in the Senior model) has a triple pow- er socket (230 V) in the workspace area and a single socket (230 V) in the rear part of the pull-out desk. FURTHER INFORMATION ON THE OFFICE MODULE...
Page 16: Sockets Built Into The Modules
CONTROL PANEL On the front side of each module is a control panel. In standby mode, only the MOVEment logo is illuminated. The control panel has a proximity sensor that activates the but- ton lighting.
Page 17: Control Panel, Senior Model
Moving modules ule individually. individually Stop button Everyday Office day Night-time Neutral All modules All modules left right The automatic movement of modules can be stopped any time by pressing any button. CONTROL PANEL, SENIOR MODEL...
Page 18: Control Panel, Junior Model
Moving modules ules will be moved individually into the correspond- ing position. Stop button Everyday Night-time All modules All modules left right The automatic movement of modules can be stopped any time by pressing any button. CONTROL PANEL, JUNIOR MODEL...
Page 19: Moving Modules Individually
To stop it from moving, you can press any button on the same module. STOP BUTTON Pressing the stop button during movement immediately stops all modules from moving. CHILD SAFETY LOCK To activate the child safety lock, press the four outer buttons for at least 2 seconds.
Page 20: Moving Modules Manually
MOVING MODULES MANUALLY Modules may only be moved manually if it is not possible to move them automatically! To avoid injury or damage, make sure that there are no people or objects on, in or be- tween the modules and that all module doors and drawers are shut.
Page 21: Repair And Maintenance
REPAIR AND MAINTENANCE Regular service and maintenance assure safe, trouble-free operation of the MOVEment system. We will inform you of any maintenance work in good time and arrange and appointment with you. Please make sure there is unimpeded ac- cess to the wall connector and the service ports in the individual mod- ules.
Page 22 EINLEITUNG...
Page 23 EINLEITUNG...
Page 24: Troubleshooting
TROUBLESHOOTING Problem Possible solutions Control panel Check the main switch and the fuses in does not respond your apartment’s fuse box. Take the following steps to restart the system: Turn the main switch (by the front door of the apartment) to position “0”. Wait a few seconds.
Page 25 If this light is not shin- ing red after you press a button on the control panel in the direction of travel of the module, automatic movement of the modules cannot be triggered. Check whether an object, an open door...
Page 26 TROUBLESHOOTING Problem Possible solutions If these steps do not yield the desired result, please scan the QR code with your smartphone and/or fill out the corre- sponding form at www.move-ment.ch/ serviceandsupport If you do not have access to the internet, please call us on the service number specified earlier in these instructions.
Page 27 Try to use something flat to remove the the modules are objects. blocking automat- If this is not possible, please scan the QR ic movement of code with your smartphone and/or fill modules out the form provided at www.move- ment.ch/serviceandsupport...
Page 28 Take the following steps to restart the blocks automatic system: Turn the main switch (by the front movement door of the apartment) to position “0”. Wait a few seconds. Restart the system by turning the main switch to position “I”.
Page 29: Disposal
DISPOSAL MOVEment systems must be disposed of by the landlord. Disposal must be done appropriately and professionally. Electrical components must be disposed of separately. TECHNICAL DATA Name Value Supply voltage 220–240 VAC_RMS, 50 Hz Power consumption Maximum power <170 W...
Page 30 EINLEITUNG SYMBOLIC IMAGE...

This manual is also suitable for:

Seli140 Juli160 Juli140 Sere160 Sere140 Jure160 ... Show all

Movement SELI160 Operating Instructions Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Movement SELI160

This manual is also suitable for:

Table of Contents