Advertisement
5
4
6
Release the speakers from the probers of the middle
bezel, then tear off 1pcs aluminum foil to uncover
the two LVDS connector, and then disconnect the
S8
USB cable, function key cable and camera
connective cable away from the connectors of the
interface board.
Disconnect the connective cable from the connector
of the connect board, then use a Philips-head
screwdriver to remove one screw for unlocking the
connect board, then release the connect board from
S9
the hooks of the camera unit. se a Philips-head
screwdriver to remove 4pcs screws for unlocking the
bracket chassis module with the panel module.
(No.1~5 Screw size= M3x3, Torque=5±0.5kgfxcm)
2
5
2
1
3
U
3
4
Disconnect the LVDS cable and 1pcs panel lamp
cable away from the connectors of the panel
S10
module, then
take away the bracket chassis module
and then put the bracket chassis module on a
protective cushion.
Use a Philips-head screwdriver to remove 1pcs
screw for unlocking the USB board with middle
bezel, then release the USB board from the hooks of
the middle bezel. Use a Philips-head screwdriver to
S11
remove 2pcs screws for unlocking the middle bezel
with front bezel. Tear off the tape to release the
camera connective cable from the panel.
(No.1~2 screw size=M2x3.3, Torque=1
No.3 screw size=M3x4, Torque=5
1
2
DELL S2422HZ
1
0.2kgfxcm;
±
0.5kgfxcm)
±
3
2
Advertisement
