Contents Introduction ........................... 3 Product description ......................3 Intended puporse....................... 3 Product Overview ........................4 Connection ..........................4 Programming ......................... 5 Control with IR transmitter ....................5 Control with Radio transmitter .................... 6 Control with control switch ....................7 Resetting to default setting ....................8 Cleaning ..........................
1. Introduction 1.1 Product description The Gewa Andromeda Socket is a so called relay unit. By connecting the relay unit between, for example, a lamp and a wall socket, you can turn the lamp on and off with a transmitter or a control switch.
2. Product Overview Andromeda Socket consists of the following parts: 419881 Andromeda Socket UK 1. 230V socket. For connection of 4. On/Off button. For programming and to the device to be controlled. manually turn On/Off the power. 2. Detector eye. Receives IR signal. 5.
4. Programming The Andromeda Socket can be programmed for the following use: • IR control with GewaLink channels Radio control (Z-Wave) • Control switch • WARNING: The relay is activated during the programming. This may cause an inadvertent activation of some equipment. 4.1 Control with IR transmitter 4.1.1 On/Off (bistable function) Example: To turn on and off a lamp every other time the button on the IR-transmitter is...
4.2 Control with Radio transmitter 4.2.1 Radio transmitter (Z-Wave) Example: To turn a lamp on and off every other time you press the button on the Z-wave transmitter. When controlling with radio you can only have the On/Off function (bistable function). Andromeda Socket can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications.
4.3 Control with control switch NOTE: Only control switches that meet the requirements of the Medical Device Directive 93/42/EEC may be connected to Andromeda Socket. 4.3.1 On/Off (bistable function) Example: To turn on and off a lamp every other time the control switch is pressed. 1.
5. Resetting to default setting On delivery the Andromeda Socket is factory set with GewaLink channel 16 and bistable function. Do the following to restore: 1. Press and hold the On/Off button (4) for approx. 6 seconds until the indication light glows steadily.
8. Technical data 8.1 Environment The Andromeda Socket may only be used indoors in a dry environment (IP20). 8.2 Technical data Supply voltage: 230 V AC, 50 Hz Power consumption: 2.0 W Maximum relay load: 2990 VA, 13 A resistive load Programming channels: GewaLink channels 0-127 (channel 62 has no function) and 4096 code...
Abilia AB is not liable for any loss, damage or consequential loss if the product has been used or installed in any way other than as specified in this document. Any form of damage or tamp.