Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Long Island Technology Group BFW BayPort
- Page 1 BayPort Storage Solution Operating Manual...
-
Page 3: Table Of Contents
Table of Content Symbol Description ..................2 Warnings and Cautions ................3 Intended Use ....................... 3 Unintended Uses ......................3 Overview .....................4 System Description ...................... 4 Installation ....................5 Operation ....................9 Cleaning and Maintenance ................11 Storage Unit ....................... 11 Specifications ....................12 Troubleshooting and Service ..............13... -
Page 4: Symbol Description
Symbol Description These important symbols may appear on your Long Island Technology Group BayPort . Please note their meaning. CE marking of conformity indicates this device complies with European Directive 93/42 EC on medical devices and Directive 2002/95/EC on the restriction of the use of certain hazard- ous substances in electrical and electronic equipment. -
Page 5: Warnings And Cautions
Read and understand the Operating Manual before using the unit. Use BayPort Storage Solution only with BFW /Long Island Technology Group products or accesso- ries. DO NOT subject the BayPort Storage Solution to strong shocks, which include but are not limited to dropping the unit on the floor. -
Page 6: Overview
Overview System Description The BFW BayPort Storage Solution is constructed of a durable metal housing. Hangers allow up to two BFW headlight systems to be stored easily. Additional storage is provided via the center pocket. Multiple mounting solutions are available such as wall mounted and a mobile configuration. -
Page 7: Installation
Installation Wall Mount 1. Follow GCX instructions to mount the rail to the wall. NOTE: Do not attach the Depressible Channel Stop provided with the GCX Rail 2. The Adjustable Stop can be moved by loosening the Set Screw using a 1/8” Hex Screw Driver. - Page 8 Installation 3. Check that the four Rail Locking Screws are threaded as shown below. If the screws are threaded too far then it won’t slide into the rail. 4. Slide the unit onto the rail. The center block fits in the center channel of the rail.
- Page 9 Installation 5. Tighten the four Rail Locking Screws evenly. 6. Attach the Hooks to either of the two sets of mounting holes with the longer hook towards the top. The additional set of mounting holes can be used if the Hook becomes too loose.
-
Page 10: Operation
Operation Mounting Headlights 1. Remove any batteries from the holster. 2. Disconnect the headlight from the holster. 3. Place the holster on the lower hook via the Access Hatch on the bottom of the holster. 4. Place the headband on the top hook through the back brace. - Page 11 Operation 5. Wrap the headlight cable around the hook behind the headband. 6. Up to two headlights can be mounted at one time.
-
Page 12: Cleaning And Maintenance
Cleaning and Maintenance Storage Unit 1. Clean the BayPort Storage Solution with any cleaning wipe. 2. Use a can of compressed air to clean out any dust accumulations. DO NOT use any sterilization process or cleaning process using excessive heat or humidity as it will damage the unit Note: Damaging any part of the system with the use of improper cleaning agent or cleaning process will void all warranties. -
Page 13: Specifications
Specifications Mechanical Storage Solution LxWxH 19.25” x 8.25” x 2.5” Weight 8.8 lbs... -
Page 14: Troubleshooting And Service
Warranty and Service Warranty against manufacturer’s defects applies to the following components of the BayPort™ Storage Solu- tion under normal use for one (1) year from the date of sale from Long Island Technology Group (includes parts and labor). The warranty does not cover products damaged by the following: •... - Page 15 Scan Here to See All Long Island Technology Group Manuals Or Visit: http://www.litgp.com/manuals Contents are fragile. Handle with care. 60 Carolyn Blvd, Farmingdale NY 11735 (631) 270-4463 litgp.com Revision 1.1 9/30/2019 Manufactured by Long Island Technology Group, LLC 60 Carolyn Blvd, Farmingdale, NY 11735...