Before Operation Handling the magazine Grasp the sliding door knob and slide the door fully to the right. Turn the power on before loading and unloading discs. Loading discs Pull the tray removal knob with your finger and draw the disc tray out of the magazine. Be careful not to drop the disc.
Page 8
Removing discs Cautions on using the magazine Grasp the sliding door knob and slide the This product’s magazine is used exclusively door fully to the right. for this product. CD changer magazines (included magazines or accessories) cannot be used with the product. Disc trays for CD changer magazines cannot be used with this product’s magazine.
When using remote control Preparing the remote control Insert battery (3V, CR2025) into the remote control. Make sure the + side of the battery faces up before closing the cover. 1) Open the cover, pull the cover as illustrated 2)Insert cell (3V),Close the cover Operating with the remote control Point the remote control at the remote sensor within about 2 meter and press the buttons.
Page 21
Change the position of the springs. Remove the shipping keys. Three keys are mounted to the changer’s bottom With this product, the positions of the built-in panel to protect the product during shipment. Be anti-vibration springs must be changed according sure to remove these keys before installing the to the angle of installation.
Connections AV WIRE IP BUS POWER CABLE AV WIRE Audio out This terminal is used to audio channels output(R-R,R-L,F-R,F-L). Video output/ Coaxial Connector This connectors of VIDEO1 and VIDEO2 are used in combination with the video inputs of another product( AV head unit or TV monitor). This connector of COAXIAL is used to connect coaxial type digital audio input.