General Connection - PENTA 30 Series Operator's Manual

Connection
Coupling to tow vehicle – Hitch
Reverse the towing vehicle until hitch is lined up with the eye
Raise the tow hitch and lock into raised position
WARNING : Ensure all personnel are clear of danger around the Mixer
WARNING : Make sure the trailer is properly secure and attached before moving
WARNING : Park Mixer on firm and level ground
Draw Bar Connection
Hitch compatibility
Jacks
Hydraulic Connections
It is import to keep the hose connections clean.
Connect the hydraulic service line to the connection on the tractor
1. Make sure that all components in the hydraulic system are kept in good condition and
are clean.
2. Relieve pressure before working on the hydraulic system.
3. Replace any rusted, worn, cut, abraded, flattened, or kinked hoses and metal lines
immediately.
4. Do not attempt makeshift repairs to hydraulic lines, fittings, or hoses by using tape,
clamps, or cements. The hydraulic system operates under extremely high pressure.
Such repairs will fail suddenly, and create a hazardous and unsafe condition.
5. Wear proper hand and eye protection when searching for a high pressure hydraulic
leak. Use a piece of wood or metal as a backstop instead of hands to isolate and
identify leak. Do not attempt to repair a leak, but replace the hose instead.
6. If injured by a concentrated high pressure stream of hydraulic fluid, seek medical
attention immediately. Serious infection or toxic reaction can develop from hydraulic
fluid piercing the skin.
7. Before applying pressure to the system, make sure all components are tight and that
lines, hoses, and couplings are not damaged.
Think SAFETY! Work SAFELY!
Uncoupling the tow vehicle - Hitch
Ensure the drawbar is in the tow position
Lower the trailer onto the drawbar
Decouple all hoses and PTO connection
When disconnected pace in holder.
.
14