Subscribe to Our Youtube Channel
Related Manuals for Aim AS19C
Summary of Contents for Aim AS19C
- Page 1 U S E R M A N U A L Dry / Steam, Spray & Surge IRON 2400 W • CeramiC Soleplate • 350 ml Water tank • Water level indiCator • Self Cleaning funCtion • antI drIp • poWer IndiCator light •...
-
Page 2: Table Of Contents
INDEX • IMPORTANT SAFEGUARDS • KNOW YOUR STEAM IRON • USING YOUR STEAM IRON • CLEANING AND MAINTENANCE • IRONING TIPS • WARRANTY • REPAIRS PROCEDURE... -
Page 3: Important Safeguards
USER INSTRUCTIONS Please read this instruction manual carefully before using for the first time, and always keep these instructions. IMPORTANT SAFEGUARDS When using the Steam Iron, basic safety precautions should always be followed including the following: Read all instructions before using. Before using check that the voltage of wall outlet corresponds to the one shown on the rating plate. -
Page 4: Know Your Steam Iron
IMPORTANT SAFEGUARDS - CONTINUED Do not leave iron unattended when connected into power supply or on an ironing board. Do not use outdoors. KNOW YOUR STEAM IRON A. Soleplate B. Spraying Water Outlet C. Water Tank Inlet D. Variable Steam / Self Cleaning Button E. - Page 5 KNOW YOUR STEAM IRON - CONTINUED Soleplate Ceramic Soleplate can be heated up and be used to iron garments. Spraying Nozzle When pressing spraying water button instantly, water is sprayed from this outlet. Water Tank Inlet Filling water into water tank from it, Make sure water should not exceed the maximum level (350 ml) as indicated on water tank.
-
Page 6: Using Your Steam Iron
USING YOUR STEAM IRON BEFORE FIRST USE 1. Remove any sticker, protective foil or storage cover from the soleplate. 2. Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes to remove any residue on the soleplate. Note: It is normal that a strange odor comes out from the unit for the first use. - Page 7 5. Once soleplate temperature has reached the preset temperature, indicator light will go off, then set steam button to your desired steam output or dry position and begin ironing. WARNING: Do not touch hot soleplate at any time! 6. Press spraying water button a couple of times to moisten the laundry if necessary, before spraying make sure that there is enough water in water tank.
-
Page 8: Cleaning And Maintenance
CLEANING AND MAINTENANCE AFTER IRONING 1. Disconnect power supply and empty the water left in water tank. 2. Reconnect into power supply and disconnect after indicator light goes off, make soleplate dry. 3. Let the iron completely cool down, then wipe flakes and any other deposits on the soleplate with a damp cloth or a non-abrasive (liquid) cleaner. -
Page 9: Ironing Tips
IRONING TIPS 1. Always check first whether a label with ironing instructions is attached to the article. Follow these ironing instructions in any case. 2. The iron heats up quicker than cooling it down, therefore, you should start ironing the articles requiring the lowest temperature such as those made of synthetic fibre. 3. If the fabric consists of various kinds of fibres, you must always select the lowest ironing temperature to iron the composition of those fibres. -
Page 10: Warranty
2 YEAR LIMITED WARRANTY The Manufacturer hereby provides a warranty to the original purchaser of this product (‘the consumer’) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 2 year from the date of purchase. EXCLUSIONS • The warranty does not include and will not be construed to cover products damaged as a result of disaster, misuse, commercial use, not in accordance within the written instructions included with the product, abuse and/or any non-authorised modification of the product, incorrect installation of the product or normal wear and tear. -
Page 11: Repairs Procedure
REPAIRS PROCEDURE Should you experience any faults on your Aim product, please adhere to the following procedure to have the fault rectified speedily and professionally. You can return the product to the store. Call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa) to report the fault and make arrangements for the next steps.
Need help?
Do you have a question about the AS19C and is the answer not in the manual?
Questions and answers