Using The Quickset Guide - GE VG4065 User Manual

FIRST THINGS FIRST
Step 5: Tune the TV
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input.
• If you connect your VCR using the IN (FROM ANT.) and OUT
(TO TV) jacks with RF coaxial cable, set the 3 CH 4 switch to
channel 3 or channel 4 — the channel you want to use on
your TV.
• If you connect your VCR using the AUDIO/VIDEO jacks
with audio/video cables, select the TV's video input with
the remote's TV and INPUT buttons to see the signal. See
page 55 for more information about your TV's input channel.
Step 6: Turn on the VCR
Press POWER on the VCR's front panel or VCR on the remote to
turn on the VCR. The first time you turn the VCR on, a menu
screen appears. This is the start of a QuickSet Guide which helps
you pick different options for your VCR.
Step 7: Using the QuickSet Guide
The QuickSet Guide is an automated procedure that helps you
set up your VCR. The first time you turn on your VCR, the first
screen of the Guide appears.
Select a language.
Seleccione un idioma.
Choisissez une langue.
1 English
2 Espanol ÷
3 Francais
1. Press 1 for English, 2 for Español (Spanish), or 3 for Français
(French).
The remaining menus throughout the set up will appear in the
chosen language. Just follow the step-by-step procedures until
setup is complete.
Continued on Next Page
VCR Viewing Channel
AUDIO
OUT
VIDEO
A/V Input/Output Jacks
When using the IN (FROM ANT.) and
OUT (TO TV) jacks to connect your
VCR, tune your TV to channel 3 or 4.
The 3 CH 4 switch on the back of the
VCR determines which TV channel
is used to see the VCR's output.
When using the AUDIO/VIDEO jacks
to connect your VCR, tune your TV
to the TV's video input channel with
the TV and INPUT buttons on your
remote control. For more
information about video line input ,
see "How to Find Your TV's Video
Input Channel" in the References
section of this manual.
IN
(FROM ANT.)
IN
OUT RF
(TO TV)
CH
3 4
Channel 3/4 Switch
5