GE VG4052 User Manual page 56

APPENDIX: REFERENCE
Internal clock shows incorrect time or date
• Power interruption. Make sure cable box or VCR is tuned to channel
carrying the XDS information.
• Check to make sure the clock is set accurately (check AM/PM and
date).
• Check Daylight-Saving setting. The clock may have adjusted for
daylight-saving time.
Time did not adjust for daylight-saving time
• Check to make sure daylight-saving feature is set correctly.
VCR makes noise when stopped
• VCR is removing tape from heads. This is normal. The head
cylinder inside the VCR will continue to rotate for a few minutes
after you put the VCR in the stop mode.
Will not Auto Channel Search active channels correctly
• Check to make sure the antenna connections are secure and
correct.
• Check to make sure the Signal Type: CABLE/ANTENNA feature is
set correctly.
• If Detect Automatically was selected for the Signal Type in the
AUTO CHANNEL SEARCH menu, try using either CABLE TV or
ANTENNA instead.
• May not be necessary if using a cable box for all channels. Contact
your local cable company for more information.
Tape plays back in slow motion
• Press PLAY to return to normal playback.
Cannot select channels over 69
• Cable channels over 69 can only be selected if Signal Type: CABLE/
ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to play automatically
• Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator flashes
• Clock is not set.
• Check to make sure there is a cassette in the VCR when a timer
recording is set.
54