Table of Contents
Advertisement
Quick Links
Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
US office: Fontana
UK office: Ipswich
DE office: Hamburg
FR office: Saint Vigor d'Ymonville
Contact Us!
Do NOT return this item.
AU office: Truganina
PL office: Gdańsk
US:cs.us@costway.com
UK:cs.uk@costway.com
AU:cs.au@costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USER'S MANUAL
Jump Starter
EP24920US
Advertisement
Table of Contents
Related Manuals for Costway EP24920US
Summary of Contents for Costway EP24920US
- Page 1 DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk USER’S MANUAL Contact Us! Jump Starter EP24920US US:cs.us@costway.com Do NOT return this item. UK:cs.uk@costway.com AU:cs.au@costway.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Model EP24920US Voltage Amps 700A Cranking amps (5s) Lead-acid battery 12V 22AH Battery type ETL certificated AC/DC ADAPTOR INPUT 120V AC, 60Hz, 0.25A OUTPUT 12V DC 1A Before You Start SAVE THIS MANUAL. These instructions are important, and contain operating and safety information that can help prevent...
- Page 3 Risk of Electric Shock. Fire and Explosion WARNING 1. Read entire manual before using this product. Follow the Risk of electric shock, fire or explosion. instructions in this manual and the instructions provided by the Lead acid batteries generate explosive gas. They manufacturer of the battery you are connecting to as well as the vehicle or equipment you are jump starting or powering.
- Page 4 OPERATING INSTRUCTIONS USING AS A 12V POWER SOURCE a. Connect the red (positive +) clamp to the positive input CAUTION terminal and the black (negative -) clamp to the negative input terminal. Use Your Jump Starter Safely b. Make sure that clamps are connected correctly and firmly, and ●...
- Page 5 VOLTAGE TESTING USING AIR COMPRESSOR Fluctuations in temperature can accelerate battery discharge. The air compressor is rated for 180 PSI. Check the unit often a. Remove the air compressor hose from the storage position. a. Press and release Test/USB/Light 3S button and check the Install adapters as necessary.
- Page 6 USING THE WORK LIGHT CAUTION 1. Press for 3 seconds and release Test/USB/Light 3S button, the Always run a test to establish whether the inverter will operate a work light on the front of jump starter will begin to work. During particular piece of equipment or device.
- Page 7 d. Reverse these steps after using the USB power. e. Recharge the unit as soon as possible after using the USB power. NOTE: When the internal battery voltage is too low, the USB power will be shut off automatically. ADDITIONAL FEATURE LOW VOLTAGE ALARM when using jump starter When using the unit, for example, turning the Power Switch on, jump starting a vehicle, using as 12V Power Outlet, using as work...
Need help?
Do you have a question about the EP24920US and is the answer not in the manual?
Questions and answers