Table of Contents
Advertisement
If you experience a problem with this unit, check the chart below before calling for service.
Symptom
Unit will not turn on.
Images/pictures are poor
quality.
All manuals and user guides at all-guides.com
TROUBLESHOOTING GUIDE
Possible Cause
Power is off.
Batteries are weak or dead.
Poor lighting.
Lens is dirty.
Subject too close.
Subject or unit moved as picture was
taken.
Subject is too far away.
Resolution is set too low.
White Balance is not set properly.
Solution
Press the Power button for one
second to turn on.
Replace batteries.
Take picture in better lighting
and/or adjust the Brightness
setting.
Clean lens with a soft cloth.
Move further away from subject.
Hold unit steady until picture is
taken; tell subject to hold still.
Move closer to subject.
Set to a higher resolution, see
page 12.
Set White Balance to reflect the
environment you are in, see
page 18.
41
Advertisement
Table of Contents
