Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21d
Advertisement
Table of Contents
Related Manuals for Pittsburgh Automotive 69886
Summary of Contents for Pittsburgh Automotive 69886
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
These carry important Assure load is centered and secured safety information. If unreadable to mounting attachments. or missing, contact Harbor Freight Tools Hold Handle while removing the Pin. for a replacement. Page 2 For technical questions, please call 1-888-866-5797. Item 69886... - Page 3 Washers (16), Lock Washers (17), and Nuts (18). Slide Wheel (24) onto each axle at end of Rear Beam (23). Then slide Washer (25) and secure with a Snap Ring (26). Item 69886 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 (27) on both ends. Insert the Handle (2) through the Mounting Plate (8) and secure with the Cotter Pin (3). Insert Handle Grip (1) onto Handle. Page 4 For technical questions, please call 1-888-866-5797. Item 69886...
-
Page 5: Mounting Engine
Mounting Arms (9) to the engine. Secure the engine properly to the crane. Use the crane to support all of the engine’s weight directly overhead, but do not start lifting the engine stand. Item 69886 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Maintenance And Servicing
AFTER USE, clean external surfaces If any are found, do not use the Stand. of the stand with a clean, moist cloth. Keep Engine Stand clean and free of dirt or grease. Page 6 For technical questions, please call 1-888-866-5797. Item 69886... -
Page 7: Parts List And Diagram
Specify UPC 193175045713 when ordering parts. Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Item 69886 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 PLEASE READ THE FOLLOWING CAREFULLY HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 69886 and is the answer not in the manual?
Questions and answers