Advertisement
Quick Links
Advertisement
Summary of Contents for FOCO Barcontainer
- Page 1 Assembly instructions Barcontainer FOCO® containers...
- Page 2 Also unscrew and save the lifting eyes on the roof. Then remove the wooden blocks at the corners of the package and the iron blocks in the middle, these are not required for assembly, but may be useful in leveling the container. FOCO® containers...
- Page 3 Once the panel is attached to the floor it can be released unless there is wind. The side panels (walls) are placed first, then the door is placed. FOCO® containers...
- Page 4 3 screws (photo 3 + 4). Then the lock is fixed with the long screw on the side of the door (photo 5). Finally, the metal protection parts are placed on each latch and on each keyhole (photo 6). FOCO® containers...
- Page 5 Then the roof is mounted using a 13 mm screw, and nut and two washers, as shown in the picture above Now screw down the rain gutter with three screws at the top of the canopy panel, it is best if someone from outside holds the screws and someone else inside tightens the screws. FOCO® containers...
- Page 6 The handles should be attached from the outside and inside. Finally, the crane eyes are reattached to the roof of the container, no tools are required for this. FOCO® containers...