Advertisement
Quick Links
Advertisement
Related Manuals for Wildtronics 2021
Summary of Contents for Wildtronics 2021
- Page 1 Wildtronics, LLC All Purpose Parabolic Microphone Instruction Manual 2021 Model...
- Page 2 Thank you for purchasing the Wildtronics All Purpose Parabolic Kit. Your new kit was designed for years of service, ease of use, superior performance, and allows mounting almost any existing microphone including the Wildtronics Micro Mic PIP, Micro Mic XLR, and Amplified Omni Microphones.
- Page 3 All Purpose Parabolic Microphone Parts Optional Secondary Windscreen Frame Kit Accessory...
- Page 4 Assembly of Dish and Handle: To assemble the Hub assemble to the parabolic dish, pick up and hold the Front Plate so that the flat side is pointed down and the beveled side is pointed up. Place the Parabolic Dish over the Front Plate. Now, place the Backplate over the rear of the Parabolic Dish.
- Page 5 Using the Mic Tube to mount a microphone: The Mic Tube has a number of features and associated parts. Focusing works as follows, the Mic Tube has an integral focus gauge with colored lines, A, B, and C that correlate to the microphone focal points FI, the end of the tube, and FO.
- Page 6 the Mic Tube. This will retain the cable in the Mic Tube. Slide the mic cable and the Mic Tube into the Front Plate, and through the Backplate hub towards the Handle. Assemble o-ring, 2, onto the Mic Tube at focus position A.
- Page 7 Assembled & at mic focus Using mic Adapter Sleeves: To adapt to a number of different microphone diameters, Wildtronics uses adapter sleeves that fit over the microphone and into the Mic Tube. Select the adapter you need from the table below. When using the thick sleeve, it...
- Page 8 Assembled Micro Mic PIP Using the Wildtronics Micro Mic PIP: The Wildtronics Micro Mic Pip microphone is a great, low noise, lightweight, inexpensive microphone to use with your All Purpose Parabolic Microphone. It is powered using Plug-in Power, or PIP that is available on many 3.5mm input devices.
- Page 9 Using the Shock Mount Kit to install microphones: The optional Shock Mount Kit is another way to mount a microphone in the All Purpose Parabolic Microphone. Using the shock mount isolates accidental bump sounds from reaching the microphone. The Shock Mount Kit includes a number of o-rings that assemble onto the optional Secondary Windscreen Frame.
- Page 10 Mic pointed in using shock mount. Mic pointed out using shock mount. Using the Parabolic Microphone: Parabolic microphones are highly directional microphones that have acoustical gain. They are intended to be used to increase the signal strength and isolate single subjects beyond the abilities of any other type of microphone.
- Page 11 Handle. Care: The Wildtronics All Purpose Parabolic Microphone doesn't require much maintenance. When the dish is dirty, disassemble, blow off excess dirt with air, and clean with a mild dish detergent and water mixture and a microfiber or a very soft cloth.
- Page 12 The Wildtronics parabolic microphone is warranted for 1 year against manufacturer defects and limited operational problems when used under normal conditions. Wildtronics will try to resolve any problems. No part of the microphone will be covered under warranty if the microphone was pointed towards a heat source or the sun, or stored at over 200/93°...
- Page 13 (including removal of any component or external cover). How to File a Claim? Wildtronics, LLC will not provide any warranty coverage unless claims are made in compliance with all terms of the warranty statement included with your Wildtronics, LLC product and you follow proper return procedure.
- Page 15 Name: Address: Country: Phone number: Email address: Model #: Serial #: Date of purchase: Purchased from: Email to customersvc@wildtronics.com or mail to Wildtronics, LLC, PO Box 376, Newton Falls, OH 44444, USA.
- Page 16 Wildtronics, LLC PO Box 376 Newton Falls, OH 44444 USA +1 (330)-577-8814 customersvc@wildtronics.com wildtronics.com...