Table of Contents
Advertisement
2. Touch calibration
Promultis touch screens are calibrated
with the pre-installed Windows
Touch Pack and should be working
automatically. The settings should not
require any further adjustment.
If there is no touch response
Please check the power connections
to the overlay are pushed in fully. Also
check the USB cable is connected
into the overlay and the PC, try
disconnecting and re-connecting both.
After checking all cables are fully
connected please try shutting down or
restarting the PC.
If the touch is not precise
Go through calibration setup.
If there are any further faults or issues,
please contact Promultis technician.
3. Once on the settings page, tap on
"find a setting" at the top and type in
calibrate
MULTITOUCH SOLUTIONS
1. Open start menu by tapping the
Windows button in the lower left corner
of the screen
2. Open settings by tapping the gear
icon
3
7
2
1
For more exciting multitouch products visit
www.promultis.info
earlylearningtable
or call +44 (0) 239 251 2794
Advertisement
Table of Contents
