Rehau BEHR KEEP COOL Curve 625 OEM Fitting Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

KEEP COOL

Curve 625 OEM, Against Wall

KEEP COOL

Curve 1250 OEM, Against Wall

Please read the full Fitting Instruction

before initiating the installation.

KEEP COOL® OEM

FITTING INSTRUCTIONS

One-sided: Against wall

This Fitting Instruction is exemplified by a KEEP COOL® Curve 625 OEM 2500

mm (8 Foot) glass cover with a 3-glass solution, but is applicable for both KEEP

COOL® Curve OEM and KEEP COOL® Plane OEM in all lengths and with all

glass combinations. Installation differences between KEEP COOL® Curve OEM

and KEEP COOL® Plane OEM will be evident from the fitting instruction.

KEEP COOL

Plane 625 OEM , Against Wall

KEEP COOL

Plane 1250 OEM, Against Wall

Table of Contents

Need help?

Do you have a question about the BEHR KEEP COOL Curve 625 OEM and is the answer not in the manual?

Questions and answers

Summary of Contents for Rehau BEHR KEEP COOL Curve 625 OEM

Page 1 Plane 1250 OEM, Against Wall Please read the full Fitting Instruction before initiating the installation. REHAU-BEHR A/S | Bavne Allé 34 | 8370 Hadsten / Denmark | Tel: +45 86 98 28 22 | www.rehau-behr.com | info@rehau-behr.com © REHAU-BEHR A/S.
Page 2: Table Of Contents
1. CONTENTS Contents ..........................................2 General Information ......................................3 Frame parts: KEEP COOL Curve OEM ................................... 4 ® Frame parts: KEEP COOL Plane OEM..................................5 ® Frame assembly 5.A KEEP COOL Curve OEM ....................................6 ® 5.B KEEP COOL Plane OEM ....................................9 ®...
Page 3: General Information
CONTACT After installation, please hand over the user manual and the microfibre cloths to the store personnel. Please help us improve our product by sending us an email to aftersales@rehau-behr.com. THANK YOU FOR YOUR COOPERATION. Fitting Instructions KEEP COOL ®...
Page 4: Frame Parts: Keep Cool ® Curve Oem
3. FRAME PARTS / KEEP COOL® CURVE OEM Cover parts RAL 7015 103626 104155 103613 103615 104443 104441 103678 103704 RAL 7046 103627 104156 103614 103616 104444 104442 103679 103706 RAL 9005 105121 105243 105123 105124 105246 105245 105122 105125 RAL 7015 103657 103655...
Page 5: Frame Parts: Keep Cool ® Plane Oem
3. FRAME PARTS / KEEP COOL® PLANE OEM Cover parts RAL 7015 103626 104155 103613 103615 104443 104441 103678 103704 RAL 7046 103627 104156 103614 103616 104444 104442 103679 103706 RAL 9005 105121 105243 105123 105124 105246 105245 105122 105125 Side profile Cross profile Cross profile MJ...
Page 6: Frame Assembly
5: FRAME ASSEMBLY 5.A: KEEP COOL® CURVE OEM Recommended torque = 1,2 Nm (500-800RPM) RAL 7015 103626 RAL 7046 103627 100349 RAL 9005 105121 Recommended torque = 1,2 Nm (500-800RPM) RAL 7015 103615 RAL 7046 103616 100388 RAL 9005 105124 RAL 7015 103613 RAL 7046...
Page 7 Recommended torque = 1,2 Nm (500-800RPM) RAL 7015 103657 RAL 7046 103658 RAL 9005 105148 100349 RAL 7015 103655 RAL 7046 103656 RAL 9005 105149 RAL 7015 104155 RAL 7046 104156 RAL 9005 105243 Recommended torque = 1,2 Nm (500-800RPM) RAL 7015 104457 RAL 7046...
Page 8 Gently tap in the pins using a rubber mallet RAL 7015 103678 RAL 7046 103679 RAL 9005 105122 RAL 7015 103704 RAL 7046 103706 RAL 9005 105125 RAL 7015 103704 Cross profile MJ RAL 7046 103706 Cross profile RAL 9005 105125 Cross profile Cross profile...
Page 9: B Keep Cool ® Plane Oem
If the handrail and the back wall are not at the same level, use a fill strip Fill Strip NB: Handrail and back wall of gondola must be at same height. Use fill strips to even out differences. Combine fill strips to match differences precisely 5.B: KEEP COOL PLANE OEM...
Page 10 RAL 7015 103615 RAL 7046 103616 100388 RAL 9005 105124 RAL 7015 103613 103614 RAL 7046 100388 RAL 9005 105123 100349 RAL 7015 104155 RAL 7046 104156 RAL 9005 105243 Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 11 RAL 7015 104441 RAL 7046 104442 100349 RAL 9005 105245 RAL 7015 104443 100349 RAL 7046 104444 RAL 9005 105246 Insert the cross profiles in the adapters on the rear side profile. Gently tap in the pins using a rubber mallet. RAL 7015 103678 RAL 7046...
Page 12 Insert the cross profiles in the adapters of the front side profile. Gently tap in the pins using a rubber mallet. RAL 7015 103678 RAL 7046 103679 RAL 9005 105122 RAL 7015 103704 RAL 7046 103706 RAL 9005 105125 If the handrail and the back wall are not at the same level, use a fill strip Fill Strip NB: Handrail and back wall of gondola...
Page 13: A Keep Cool ® Curve Oem
If factory assembled, the frame can be placed on top of the island and attached loosely with strong adhesive tape before transport. NB: Glasses must be transported in the transport boxes. WARNING: It is not safe to transport the glasses installed in the cover or in any horizontal position.
Page 14 6: ASSEMBLY OF AGAINST WALL CABINET AND PREPARATION OF COVER FITTING. Install the against wall cabinet as normal. The covers can be removed to acces the bottom of the island NB: To ensure correct fitting of the cover, it is crucial to ensure a tight fit between the island sections.
Page 15 Clean the handrail thoroughly NB: The handrail must be very clean to gain optimum strength of tape. Bridge smaller height differences, i.e. corners and connections, using tape Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 16 7: COVER ASSEMBLY 7.A: KEEP COOL® CURVE OEM Place the cover frames loosely on top of the island. Attach gables to both ends of the cover. RAL 7015 103568 RAL 7046 103569 RAL 9005 105151 100211 Right Gable 100171 RAL 7015 103566 RAL 7046 103567...
Page 17 Cover Plates are used if a gap is present at the end of the cover Right Cover Plate Left Cover Plate Section assembly: Remove tape liner from Cross Profile MJ and attach RAL 7015 103585 RAL 7046 103586 RAL 9005 105387 RAL 7015 103579...
Page 18 7.B: KEEP COOL® PLANE OEM Place the frames loosely on top of the island. NB: On KEEP COOL Plane the cross profile is part of the gable ® profile. Consequently, the MJ cross profile and the MJ adapters are not fitted on the ends of the frame. Attach gables to both ends of the cover 100470 100470...
Page 19 Use cover plates to fill gaps at the ends of the cover (if any). Section assembly: Remove tape liner from Cross Profile MJ and attach RAL 7015 103559 RAL 7046 103580 RAL 9005 105331 Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 20: Cover Fitting
8. COVER FITTING Close all air gaps between cover and gondola, using additional layers of tape 104137 104131 Align one side of the sections to the gondola, while taping ~20 cm at each section end NB: Adjust the frame centered on the against wall cabinet, matching the cabinet sections, before taping the cover.
Page 21 Fully tape one side of the cover Insert sliding glasses in the corners of each section Sliding Glass Bottom Track Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 22 Adjust frame untill glass movement is satisfactory, and tape about 20 cm at each section end on the opposite side     Tape down remaining sides of the cover Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 23 Insert remaining bottom track glasses Sliding Glass Bottom Track Insert all middle track glasses Sliding Glass Middle Track Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 24 Attach bump-ons to back profile 104145 104145 104145 104145 104145 104145 104145 104145 104145 Insert all top track glasses and push them against the back profile Glass Assembly Top Track Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 25 Remove tape liner from top track glasses and attach NB: Tracks must remain parallel. Insert T-profiles and caps into the section joints T-Profile RAL 7015 103715 RAL 7046 103720 RAL 9005 105335 Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...
Page 26: Adjustments
9. ADJUSTMENTS If glass movement is not optimum the glasses can be rearranged Glass movement can be further optimized by adjusting the sides of the sliding shoes, using a smooth file Fitting Instructions KEEP COOL ® OEM Against Wall, v.2.1, 11/15...

This manual is also suitable for:

Behr keep cool plane 625 oem Behr keep cool curve 1250 oem Behr keep cool plane 1250 oem